Hi Fabio, Thanks for the info.
Regards, john On Wed, Nov 12, 2014 at 10:19 AM, Fabio Estevam <feste...@gmail.com> wrote: > Hi John, > > On Wed, Nov 12, 2014 at 3:14 PM, John Tobias <john.tobias...@gmail.com> wrote: >> This patch is for SPL support for iMX6 SabreSD. The said >> patches has been tested to work on SD2 and SD3 port of the >> said board. >> >> After applying the following patches, it will produces >> SPL and u-boot.img binary images. You should run the >> two commands below to store it in your SD or eMMC. >> >> sudo dd if=SPL of=/dev/xxx bs=1K seek=1; sync >> sudo dd if=u-boot.img of=/dev/xxx bs=1K seek=69 > > Thanks for working on this of for your patience. > > It worked fine here: > > Tested-by: Fabio Estevam <fabio.este...@freescale.com> > Reviewed-by: Fabio Estevam <fabio.este...@freescale.com> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
