Simon, thank you for your help. Simon Glass-3 wrote > BTW best not to have this in your sig when sending to a public mailing > list.
I have no control of over my company's email signature so I switched my subscription to use gmail. Simon Glass-3 wrote > There are only 3 places in mkimage.c which call usage() so you should > be able to track which one it is. Probably building with V=1 will show > you the mkimage command line you are using. I was able to build using V=1 and noticed the entry point, CONFIG_SYS_TEXT_BASE, wasn't defined in include/configs/mx53_xxx.h file. We previously had it defined in /board/freescale/mx53_xxx/config.mk. Now everything builds without error. But…I do not get serial output. I really need a small victory and see some life out of the board. Here’s what I think is necessary to get serial output to console… 1. At minimum the uart setup in /board/freescale/mx53_xxx/mx53_xxx.c 2. Version, boot device and DCD setup in /board/freescale/mx53_xxx/imximage.cfg 3. Minor changes to build successfully in /include/configs/mx53_xxx.h I’ve ported flash_header.S to imximage.cfg. I’ve moved our old /board/freescale/mx53_xxx/mx53_xxx.c to the new u-boot directory, setup the pads using the new nomenclature and modified the library includes to use the new ones. I’ve moved include/configs/mx53_xxx.h file to the new u-boot directory and made the necessary edits to build successfully. I’ve triple checked the pads and flash header. I dd the resulting, non-padded, u-boot.imx image to sd card by “dd if=u-boot.imx of=/dev/sdd seek=2 && sync”, but I get no life. I’m stuck at the moment and hoping someone has some advice as to what I may be missing or doing wrong. Best, Dave -- View this message in context: http://u-boot.10912.n7.nabble.com/MKIMAGE-u-boot-imx-build-error-tp193606p193874.html Sent from the U-Boot mailing list archive at Nabble.com. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
