Hi, I am in the middle of upgrading u-boot-2009.08 to u-boot-2014.07. Our
resident u-boot expert is on vacation and I'm running into some issues. After
working through a ton of compile errors I think I'm getting close.
Our system is based on the Freescale iMX53.
I am able to build and run on a mx53loco development board just fine, but for
some reason I'm getting the below error when building for our custom board,
which is similar to the development board.
I've compared the development board files to our files and I can't pinpoint why
mkimage is giving a problem.
LD u-boot
OBJCOPY u-boot.bin
CFGS board/freescale/mx53_gogo/imximage.cfg.cfgtmp
MKIMAGE u-boot.imx
Usage: /home/dk/linux-upgrade/bootloader/u-boot-2014.07/tools/mkimage -l image
-l ==> list image header information
/home/dk/linux-upgrade/bootloader/u-boot-2014.07/tools/mkimage [-x] -A
arch -O os -T type -C comp -a addr -e ep -n name -d data_file[:data_file...]
image
-A ==> set architecture to 'arch'
-O ==> set operating system to 'os'
-T ==> set image type to 'type'
-C ==> set compression type 'comp'
-a ==> set load address to 'addr' (hex)
-e ==> set entry point to 'ep' (hex)
-n ==> set image name to 'name'
-d ==> use image data from 'datafile'
-x ==> set XIP (execute in place)
/home/dk/linux-upgrade/bootloader/u-boot-2014.07/tools/mkimage [-D
dtc_options] [-f fit-image.its|-F] fit-image
-D => set options for device tree compiler
-f => input filename for FIT source
Signing / verified boot not supported (CONFIG_FIT_SIGNATURE undefined)
/home/dk/linux-upgrade/bootloader/u-boot-2014.07/tools/mkimage -V ==>
print version information and exit
make[1]: *** [u-boot.imx] Error 1
make: *** [u-boot.imx] Error 2
gogo build failed
If I set #define CONFIG_FIT_SIGNATURE in the config file then I get a ton of
other build errors so I'm not sure if that's the correct path to take. Besides,
the development board doesn't have CONFIG_FIT_SIGNATURE defined in its config
file.
Any help would be greatly appreciated.
Thanks,
Dave
Please be advised that this email may contain confidential information. If you
are not the intended recipient, please notify us by email by replying to the
sender and delete this message. The sender disclaims that the content of this
email constitutes an offer to enter into, or the acceptance of, any agreement;
provided that the foregoing does not invalidate the binding effect of any
digital or other electronic reproduction of a manual signature that is included
in any attachment.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
