Hello Simon,

On 10/28/2014 05:31 PM, Przemyslaw Marczak wrote:
After remove the offsets in Exynos4/4x12 gpio enums,
an additional gpio base addresses are required.

Signed-off-by: Przemyslaw Marczak <p.marc...@samsung.com>
---
  arch/arm/include/asm/arch-exynos/cpu.h | 9 +++++++++
  1 file changed, 9 insertions(+)

diff --git a/arch/arm/include/asm/arch-exynos/cpu.h 
b/arch/arm/include/asm/arch-exynos/cpu.h
index ba71714..78aceef 100644
--- a/arch/arm/include/asm/arch-exynos/cpu.h
+++ b/arch/arm/include/asm/arch-exynos/cpu.h
@@ -29,6 +29,8 @@
  #define EXYNOS4_MIU_BASE              0x10600000
  #define EXYNOS4_ACE_SFR_BASE          0x10830000
  #define EXYNOS4_GPIO_PART2_BASE               0x11000000
+#define EXYNOS4_GPIO_PART2_0           0x11000000 /* GPJ0 */
+#define EXYNOS4_GPIO_PART2_1           0x11000c00 /* GPX0 */
  #define EXYNOS4_GPIO_PART1_BASE               0x11400000
  #define EXYNOS4_FIMD_BASE             0x11C00000
  #define EXYNOS4_MIPI_DSIM_BASE                0x11C80000
@@ -70,7 +72,14 @@
  #define EXYNOS4X12_GPIO_PART4_BASE    0x106E0000
  #define EXYNOS4X12_ACE_SFR_BASE               0x10830000
  #define EXYNOS4X12_GPIO_PART2_BASE    0x11000000
+#define EXYNOS4X12_GPIO_PART2_0                0x11000000
+#define EXYNOS4X12_GPIO_PART2_1                0x11000040 /* GPK0 */
+#define EXYNOS4X12_GPIO_PART2_2                0x11000260 /* GPM0 */
+#define EXYNOS4X12_GPIO_PART2_3                0x11000c00 /* GPX0 */
  #define EXYNOS4X12_GPIO_PART1_BASE    0x11400000
+#define EXYNOS4X12_GPIO_PART1_0                0x11400000 /* GPA0 */
+#define EXYNOS4X12_GPIO_PART1_1                0x11400180 /* GPF0 */
+#define EXYNOS4X12_GPIO_PART1_2                0x11400240 /* GPJ0 */
  #define EXYNOS4X12_FIMD_BASE          0x11C00000
  #define EXYNOS4X12_MIPI_DSIM_BASE     0x11C80000
  #define EXYNOS4X12_USBOTG_BASE                0x12480000


Please check the fixed patches.
I missed the changelog, so:
- [PATCH 1/3] exynos4/4x12: cpu: add extra gpio base addresses
  Commit message cleanup

- [PATCH 2/3] exynos4/4x12: gpio: use gpio extra base addresses
  Commit message cleanup

- [PATCH 3/3] odroid: adjust gpio calls to dm gpio api
Remove the redundant sprintf calls and put the strings directly into the gpio_request() calls.

The gpio parts sub base addresses stays unchanged. I think that breaking the "pretty" names is reasonable here.

Best regards,
--
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marc...@samsung.com
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to