Hello,
On 10/27/2014 07:48 PM, Simon Glass wrote:
Hi Przemyslaw,
On 24 October 2014 09:44, Przemyslaw Marczak <p.marc...@samsung.com> wrote:
Hello Simon, Tom,
The last driver-model changes was merged too fast and I was not able
to test it well on all my boards. It was worked well for the first
look, but after deep testing - it required some additional work to do.
So this is a set of fixes required for Exynos4xxx boards.
I am not sure what about the Origen.
The patchset was rebased on the top of u-boot-dm/master, which is now:
c2ded96 serial: remove uniphier_serial_initialize() call
Tested on:
- Trats (E4210)
- UniversalC210 (E4210)
- Trats2 (E4412)
- Odroid U3 (E4412)
- Odroid X2 (E4412)
Actually I never did update the device tree numbering so I suspect
this series has been incorrect since version 1! Since exynos5 was
always sequential I somehow missing thinking about it. This is great,
thanks for straightening it all out and testing. Particularly I am
pleased about Universal since the soft SPI was a bit of a poke in the
dark.
I'll go through this soon. I was also planning to send a patch to
clean up some of the gpio_name_num_table stuff since it shouldn't be
needed any more.
Regards,
Simon
Yes, probably some bugs, was there before the last changes. But the main
issue was, that after remove the gaps in gpio enums, the pinmux and the
spl(if used) configured some wrong registers.
Now this should works.
I have some other task now, so the rest of unmerged patches I will
resend today evening.
Thank you for the review, and I hope that I didn't break any Exynos5 board?
Best regards,
--
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marc...@samsung.com
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
