On Tue, 2014-10-07 at 15:11 +0800, Chen-Yu Tsai wrote: > BOOT_TARGET_DEVICES includes MMC unconditionally. This breaks when > CONFIG_CMD_MMC is not defined. Use a secondary macro to conditionally > include it when CONFIG_MMC is enabled, as we do for CONFIG_AHCI. > > This is used when we want to use uart0 from port F, which conflicts > with mmc0. > > Signed-off-by: Chen-Yu Tsai <w...@csie.org>
Acked-by: Ian Campbell <i...@hellion.org.uk> Hans, this made me think back to your " Enable second sdcard slot found on some boards" series -- do you not want to add mmc1 as a boot target device when MMC_SUNXI_SLOT_EXTRA is enabled? > --- > include/configs/sunxi-common.h | 8 +++++++- > 1 file changed, 7 insertions(+), 1 deletion(-) > > diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h > index a31656e..7571e0e 100644 > --- a/include/configs/sunxi-common.h > +++ b/include/configs/sunxi-common.h > @@ -227,6 +227,12 @@ > "pxefile_addr_r=0x43200000\0" \ > "ramdisk_addr_r=0x43300000\0" > > +#ifdef CONFIG_MMC > +#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) > +#else > +#define BOOT_TARGET_DEVICES_MMC(func) > +#endif > + > #ifdef CONFIG_AHCI > #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) > #else > @@ -240,7 +246,7 @@ > #endif > > #define BOOT_TARGET_DEVICES(func) \ > - func(MMC, mmc, 0) \ > + BOOT_TARGET_DEVICES_MMC(func) \ > BOOT_TARGET_DEVICES_SCSI(func) \ > BOOT_TARGET_DEVICES_USB(func) \ > func(PXE, pxe, na) \ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot