On Sun, Oct 12, 2014 at 12:05 AM, Ian Campbell <i...@hellion.org.uk> wrote:
> On Tue, 2014-10-07 at 15:11 +0800, Chen-Yu Tsai wrote:
>> From: Hans de Goede <hdego...@redhat.com>
>>
>> The A31, A23 and later SoCs have an extra pin controller, called CPUs_PIO
>> or R_PIO, which handles pin banks L and beyond.
>
> Does it also have enough space for 9 banks? Since you overlay a struct
> sunxi_gpio_reg on it which has a gpio_bank[SUNXI_GPIO_BANKS] over it.
Yes it does, as seen in the latest A31 manuals released by Allwinner.
> SUNXI_GPIO_BANKS is now also confusingly named since it is really
> "number of banks on the first/original GPIO controller". Eventually
> someone will use it as the actual total and be very sad.
>
> I think it might be best if we retcon some distinct name onto the
> original GPIO controller so we can have SUNXIO_GPIO_BLA_BANKS and
> SUNXI_GPIO_R_BANKS (or even just call them controller 0 and 1 and have
> SUNXI_GPIO0_BANKS and SUNXI_GPIO1_BANKS, if that's not too confusing)
The latest manuals have "CPUx-PORT" and "CPUs-PORT" for the respective
chapters. I'm guessing "x" is for 0~3 cores, and s is for standby or
something.
Of course it's also confusing that Allwinner's sources use the "R_"
prefix for all hardware in that address range, while the datasheet
lists the GPIO function names as "s_something".
We might want to make sure the naming is consistent with the kernel
as well. (+CC Maxime)
ChenYu
> If we still need SUNXI_GPIO_BANKS after that then it would be the sum of
> those two.
>
>> Signed-off-by: Hans de Goede <hdego...@redhat.com>
>> [w...@csie.org: expanded commit message]
>> [w...@csie.org: add pin bank M and expand comments]
>> Signed-off-by: Chen-Yu Tsai <w...@csie.org>
>> ---
>> arch/arm/include/asm/arch-sunxi/gpio.h | 25 +++++++++++++++++++++++--
>> 1 file changed, 23 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h
>> b/arch/arm/include/asm/arch-sunxi/gpio.h
>> index b94ec4d..bbe815a 100644
>> --- a/arch/arm/include/asm/arch-sunxi/gpio.h
>> +++ b/arch/arm/include/asm/arch-sunxi/gpio.h
>> @@ -10,6 +10,7 @@
>> #define _SUNXI_GPIO_H
>>
>> #include <linux/types.h>
>> +#include <asm/arch/cpu.h>
>>
>> /*
>> * sunxi has 9 banks of gpio, they are:
>> @@ -29,6 +30,19 @@
>> #define SUNXI_GPIO_I 8
>> #define SUNXI_GPIO_BANKS 9
>>
>> +/*
>> + * sun6i/sun8i and later SoCs have an additional GPIO controller (R_PIO)
>> + * at a different register offset.
>> + *
>> + * sun6i has 2 banks:
>> + * PL0 - PL8 | PM0 - PM7
>> + *
>> + * sun8i has 1 bank:
>> + * PL0 - PL11
>> + */
>> +#define SUNXI_GPIO_L 9
>> +#define SUNXI_GPIO_M 10
>> +
>> struct sunxi_gpio {
>> u32 cfg[4];
>> u32 dat;
>> @@ -50,8 +64,9 @@ struct sunxi_gpio_reg {
>> struct sunxi_gpio_int gpio_int;
>> };
>>
>> -#define BANK_TO_GPIO(bank) \
>> - &((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank]
>> +#define BANK_TO_GPIO(bank) (((bank) < SUNXI_GPIO_BANKS) ? \
>> + &((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank] : \
>> + &((struct sunxi_gpio_reg *)SUNXI_R_PIO_BASE)->gpio_bank[(bank) -
>> SUNXI_GPIO_BANKS])
>>
>> #define GPIO_BANK(pin) ((pin) >> 5)
>> #define GPIO_NUM(pin) ((pin) & 0x1f)
>> @@ -75,6 +90,8 @@ struct sunxi_gpio_reg {
>> #define SUNXI_GPIO_G_NR 32
>> #define SUNXI_GPIO_H_NR 32
>> #define SUNXI_GPIO_I_NR 32
>> +#define SUNXI_GPIO_L_NR 32
>> +#define SUNXI_GPIO_M_NR 32
>>
>> #define SUNXI_GPIO_NEXT(__gpio) \
>> ((__gpio##_START) + (__gpio##_NR) + 0)
>> @@ -89,6 +106,8 @@ enum sunxi_gpio_number {
>> SUNXI_GPIO_G_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_F),
>> SUNXI_GPIO_H_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_G),
>> SUNXI_GPIO_I_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_H),
>> + SUNXI_GPIO_L_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_I),
>> + SUNXI_GPIO_M_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_L),
>> };
>>
>> /* SUNXI GPIO number definitions */
>> @@ -101,6 +120,8 @@ enum sunxi_gpio_number {
>> #define SUNXI_GPG(_nr) (SUNXI_GPIO_G_START + (_nr))
>> #define SUNXI_GPH(_nr) (SUNXI_GPIO_H_START + (_nr))
>> #define SUNXI_GPI(_nr) (SUNXI_GPIO_I_START + (_nr))
>> +#define SUNXI_GPL(_nr) (SUNXI_GPIO_L_START + (_nr))
>> +#define SUNXI_GPM(_nr) (SUNXI_GPIO_M_START + (_nr))
>>
>> /* GPIO pin function config */
>> #define SUNXI_GPIO_INPUT 0
>
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
