Hi, On 8 October 2014 14:48, Przemyslaw Marczak <p.marc...@samsung.com> wrote: > This change enables the configs required to init and setup > max77686 regulator driver, using the new driver model pmic API. > > Enabled configs: > - CONFIG_DM_PMIC > - CONFIG_DM_PMIC_MAX77686 > - CONFIG_DM_PMIC_I2C > - CONFIG_DM_REGULATOR > - CONFIG_DM_REGULATOR_MAX77686 > > Signed-off-by: Przemyslaw Marczak <p.marc...@samsung.com> > --- > include/configs/trats2.h | 14 ++++++-------- > 1 file changed, 6 insertions(+), 8 deletions(-) > > diff --git a/include/configs/trats2.h b/include/configs/trats2.h > index 42481ab..6d04498 100644 > --- a/include/configs/trats2.h > +++ b/include/configs/trats2.h > @@ -185,13 +185,11 @@ int get_soft_i2c_sda_pin(void); > #define CONFIG_SOFT_I2C_GPIO_SDA get_soft_i2c_sda_pin() > > /* POWER */ > -#define CONFIG_POWER > -#define CONFIG_POWER_I2C > -#define CONFIG_POWER_MAX77686 > -#define CONFIG_POWER_PMIC_MAX77693 > -#define CONFIG_POWER_MUIC_MAX77693 > -#define CONFIG_POWER_FG_MAX77693 > -#define CONFIG_POWER_BATTERY_TRATS2 > +#define CONFIG_DM_PMIC > +#define CONFIG_DM_PMIC_MAX77686 > +#define CONFIG_DM_PMIC_I2C > +#define CONFIG_DM_REGULATOR > +#define CONFIG_DM_REGULATOR_MAX77686 > > /* Security subsystem - enable hw_rand() */ > #define CONFIG_EXYNOS_ACE_SHA > @@ -210,7 +208,7 @@ int get_soft_i2c_sda_pin(void); > #ifndef __ASSEMBLY__ > #include <power/max77686_pmic.h> > > -#define KEY_PWR_PMIC_NAME "MAX77686_PMIC" > +#define KEY_PWR_PMIC_NAME "max77686" > #define KEY_PWR_STATUS_REG MAX77686_REG_PMIC_STATUS1 > #define KEY_PWR_STATUS_MASK (1 << 0) > #define KEY_PWR_INTERRUPT_REG MAX77686_REG_PMIC_INT1 > -- > 1.9.1 >
I suppose at some point we should start putting these into Kconfig board trats_defconfig instead of board config files. Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot