> -----Original Message----- > From: Stefan Roese [mailto:s...@denx.de] > Sent: Tuesday, May 26, 2009 1:27 PM > To: u-boot@lists.denx.de > Cc: Prafulla Wadaskar > Subject: Re: [U-Boot] [PATCH v10] Marvell Kirkwood family SOC support > > On Tuesday 26 May 2009 09:40:49 Stefan Roese wrote: > > So could you please split this Sheevaplug patch and submit the NAND > > driver in a separate patch (CC to Scott Wood as NAND custodian)? > > I just tried including the NAND driver from this patch into > drivers/mtd/nand. > Seems that a few things are still missing. > > struct kwnandf_registers not defined > KW_NANDF_BASE not defined I hope your are using in old patch version Please use http://lists.denx.de/pipermail/u-boot/2009-May/053110.html
> > And is KW_NANDF_BASE not the same as CONFIG_SYS_NAND_BASE > defined in the board config header (sheevaplug.h in your > case)? Then we should remove one of those defines. I have used KW_NANDF_BASE only reference http://lists.denx.de/pipermail/u-boot/2009-May/053110.html I will check about CONFIG_SYS_NAND_BASE support Regards.. Prafulla . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
