On Tuesday 26 May 2009 09:28:29 Prafulla Wadaskar wrote: > > Do you also have a NAND driver for Kirkwood in your queue? > > I'm asking since I need NAND support for my custom board. If > > you don't have any I will port the one from the 1.1.4 Marvell > > version to mainline. > > Hi Stefan > No need, NAND support is already mainlined in u-boot, you just need to use > it I have used it for Sheevaplug board support please see the patch > http://lists.denx.de/pipermail/u-boot/2009-May/053158.html
I know that NAND support is generally available in U-Boot. But what's currently missing is the platform/board specific driver for Kirkwood. Seems that you included the Kirkwood NAND driver into your Sheevaplug support patch. Good. But this driver should be placed in drivers/mtd/nand so that other Kirkwood boards can use it as well. So could you please split this Sheevaplug patch and submit the NAND driver in a separate patch (CC to Scott Wood as NAND custodian)? Thanks. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
