On Fri, Aug 29, 2014 at 9:07 PM, Michal Simek <michal.si...@xilinx.com> wrote: > On 08/28/2014 01:16 PM, Peter Crosthwaite wrote: >> Hi Michal, Steven, >> >> This series adds the ZYBO board to u-boot. Some components were originally >> contributed to the digilent u-boot tree (P2). Thanks to Steven Wang. The >> original code had a custom u-boot env specific for Zybo but I have dropped >> that. I have added DTS support - which in general seems to have appeared in >> u-boot since the original digilent work (P1). The new configury is P3. >> >> Regards, >> Peter >> >> Peter Crosthwaite (2): >> arm: dts: zynq: Add digilent ZYBO board dts >> kconfig: zynq: Add ZYBO board >> >> Tinghui Wang (1): >> configs: zynq: Add config support for ZYBO >> >> arch/arm/Kconfig | 3 +++ >> arch/arm/dts/Makefile | 1 + >> arch/arm/dts/zynq-zybo.dts | 23 +++++++++++++++++++++++ >> board/xilinx/zynq/Kconfig | 24 ++++++++++++++++++++++++ >> configs/zynq_zybo_defconfig | 3 +++ >> include/configs/zynq_zybo.h | 31 +++++++++++++++++++++++++++++++ >> 6 files changed, 85 insertions(+) >> create mode 100644 arch/arm/dts/zynq-zybo.dts >> create mode 100644 configs/zynq_zybo_defconfig >> create mode 100644 include/configs/zynq_zybo.h >> > > Applied all with that small fix in 2/3 reported by Jagan.
Thanks, Regards, Peter > I have also tested it on real HW. > > Thanks, > Michal > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
