On 28 August 2014 16:46, Peter Crosthwaite <crosthwaitepe...@gmail.com> wrote:
> It's a Zynq board similar in design to the currently supported ones.
> 512MB of RAM and UART1 is used.
>
> Signed-off-by: Peter Crosthwaite <crosthwaite.pe...@gmail.com>
> ---
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/zynq-zybo.dts | 23 +++++++++++++++++++++++
> 2 files changed, 24 insertions(+)
> create mode 100644 arch/arm/dts/zynq-zybo.dts
Acked-by: Jagannadha Sutradharudu Teki <jaga...@xilinx.com>
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 6e2e313..6da68ac 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -28,6 +28,7 @@ dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
> dtb-$(CONFIG_ZYNQ) += zynq-zc702.dtb \
> zynq-zc706.dtb \
> zynq-zed.dtb \
> + zynq-zybo.dtb \
> zynq-microzed.dtb \
> zynq-zc770-xm010.dtb \
> zynq-zc770-xm012.dtb \
> diff --git a/arch/arm/dts/zynq-zybo.dts b/arch/arm/dts/zynq-zybo.dts
> new file mode 100644
> index 0000000..20e0386
> --- /dev/null
> +++ b/arch/arm/dts/zynq-zybo.dts
> @@ -0,0 +1,23 @@
> +/*
> + * Digilent ZYBO board DTS
> + *
> + * Copyright (C) 2013 Xilinx, Inc.
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +/dts-v1/;
> +#include "zynq-7000.dtsi"
> +
> +/ {
> + model = "Zynq ZYBO Board";
> + compatible = "xlnx,zynq-zybo", "xlnx,zynq-7000";
> +
> + aliases {
> + serial0 = &uart1;
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0 0x20000000>;
> + };
> +};
> --
> 1.9.1
thanks!
--
Jagan.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
