Hi Tim,
On 08/08/2014 07:35, Tim Harvey wrote:
> The i2c_dis# pinmux/padconf was missing for the GW53xx (this feature was
> added to the GW53xx on revB PCB's). Additionally, remove the duplicate
> config for GW54xx.
>
> Signed-off-by: Tim Harvey <thar...@gateworks.com>
> ---
> board/gateworks/gw_ventana/gw_ventana.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/board/gateworks/gw_ventana/gw_ventana.c
> b/board/gateworks/gw_ventana/gw_ventana.c
> index 54e582b..98ee9df 100644
> --- a/board/gateworks/gw_ventana/gw_ventana.c
> +++ b/board/gateworks/gw_ventana/gw_ventana.c
> @@ -609,6 +609,8 @@ static iomux_v3_cfg_t const gw53xx_gpio_pads[] = {
> IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* IOEXP_IRQ# */
> IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> + /* DIOI2C_DIS# */
> + IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL)),
>
> /* MX6_LOCLED# */
> IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> @@ -637,8 +639,6 @@ static iomux_v3_cfg_t const gw54xx_gpio_pads[] = {
> IOMUX_PADS(PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* DIOI2C_DIS# */
> IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> - /* DIOI2C_DIS# */
> - IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* PCICK_SSON */
> IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* PCI_RST# */
>
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
