Hi Tim,
On 18/08/2014 15:52, Tim Harvey wrote:
> On Thu, Aug 14, 2014 at 8:23 AM, Stefano Babic <sba...@denx.de> wrote:
>> On 08/08/2014 07:35, Tim Harvey wrote:
>>> There are many similarities between the IMX6QUAD/IMX6DUAL and there are
>>> many similarities between the IMX6SOLO/IMX6DUALITE. Add a 'soctype' env
>>> variable that tells you which type you have.
>>>
>>> Signed-off-by: Tim Harvey <thar...@gateworks.com>
>>> ---
>>> board/gateworks/gw_ventana/gw_ventana.c | 1 +
>>> 1 file changed, 1 insertion(+)
>>>
>>> diff --git a/board/gateworks/gw_ventana/gw_ventana.c
>>> b/board/gateworks/gw_ventana/gw_ventana.c
>>> index a8fcb5d..de2336e 100644
>>> --- a/board/gateworks/gw_ventana/gw_ventana.c
>>> +++ b/board/gateworks/gw_ventana/gw_ventana.c
>>> @@ -1264,6 +1264,7 @@ int misc_init_r(void)
>>> else if (is_cpu_type(MXC_CPU_MX6DL) ||
>>> is_cpu_type(MXC_CPU_MX6SOLO))
>>> cputype = "imx6dl";
>>> + setenv("soctype", cputype);
>>
>> So you have soc=mx6 and soctype=<value of cputype>, if CONFIG_SYS_SOC is
>> set.
>>
>> Is it important to have both or you can simply redefine the variable "soc" ?
>>
>> Best regards,
>> Stefano Babic
>>
>
> Hi Stefano,
>
> Yes, I do feel its important, although the name and where its set is
> debatable.
>
> There are enough similarities between an IMX6DUAL/IMX6QUAD vs an
> IMX6SOLO/IMX6DUALLITE making it such that if your board supports all 4
> CPU's, you would usually have just two device-tree files:
> imx6q-<foo>.dtb (supporting both the QUAD and the DUAL soc variants)
> and imx6dl-<foo>.dtb (supporting both the DUALLITE and SOLO soc
> variants).
I agree on that, my only concern if the variable "soc" set to "mx6" has
still a meaning. When "soctype" is set to "imx6dl" (or whatever), "soc"
loses its meaning. Then it could be possible to set "soc" to the value
of cputype instead of adding a new one. What do you think ?=
Anyway, this is *not* a blocking point on my side. I will apply the
patch as it is if you think it is better for your board.
Best regards,
Stefano Babic
>
> Regards,
>
> Tim
>
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
