On 08/08/2014 07:35, Tim Harvey wrote: > The Gateworks System Controller EEPROM config is flash based. Add a delay > following writes to avoid errors on back-to-back writes. > > Signed-off-by: Tim Harvey <thar...@gateworks.com> > --- > board/gateworks/gw_ventana/gsc.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/board/gateworks/gw_ventana/gsc.c > b/board/gateworks/gw_ventana/gsc.c > index 37966ab..1cf38d4 100644 > --- a/board/gateworks/gw_ventana/gsc.c > +++ b/board/gateworks/gw_ventana/gsc.c > @@ -57,7 +57,7 @@ int gsc_i2c_write(uchar chip, uint addr, int alen, uchar > *buf, int len) > break; > mdelay(10); > } > - mdelay(1); > + mdelay(100); > return ret; > } > >
Applied to u-boot-imx, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
