Hi all, I am working on MPC8313erdb board. I configure U-Boot 1.3.0 for my board, But the problem is on auto-boot. When I start the board it stop on command prompt of u-boot. Please help me to solve this problem. The list of environment variables are given below.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ U-Boot 1.3.0 (May 15 2009 - 11:35:09) MPC83XX Reset Status: Software Hard, External/Internal Soft, External/Internal Hard CPU: e300c3, MPC8313E, Rev: 10 at 333.333 MHz, CSB: 166 MHz Board: Freescale MPC8313ERDB I2C: ready DRAM: 128 MB FLASH: 8 MB NAND: 32 MiB In: serial Out: serial Err: serial Net: TSEC0, TSEC1 [PRIME] => printenv ramboot=setenv rootdev /dev/ram;run setbootargs;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr nfsboot=setenv rootdev /dev/nfs;run setbootargs;run setipargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr baudrate=115200 loads_echo=1 ethaddr=00:E0:0C:00:95:01 eth1addr=00:E0:0C:00:95:02 rootpath=/nfs/root/path hostname=mpc8313erdb bootfile=uImage loadaddr=200000 netdev=eth1 ethprime=TSEC1 uboot=u-boot.bin tftpflash=tftpboot $loadaddr $uboot; protect off 0xFE000000 +$filesize; erase 0xFE000000 +$filesize; cp.b $loadaddr 0xFE000000 $filesize; protect on 0xFE000000 +$filesize; cmp.b $e fdtaddr=400000 fdtfile=mpc8313erdb.dtb console=ttyS0 setbootargs=setenv bootargs root=$rootdev rw console=$console,$baudrate $othbootargs setipargs=setenv bootargs nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off root=$rootdev rw console=$console,$baudrate $othbootargs filesize=490000 fileaddr=100000 gatewayip=10.0.0.1 netmask=255.0.0.0 bootargs=root=/dev/mtdblock6 rootfstype=jffs2 rw console=ttyS0,115200 bootcmd=cp.b fe710000 40000 11000; go 40004; bootm fe100000 - fe700000 stdin=serial stdout=serial stderr=serial ethact=TSEC1 Environment size: 1334/8188 bytes => ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Thank in advance.
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
