Dear Przemyslaw Marczak,
On 12/06/14 18:46, Przemyslaw Marczak wrote:
> It is possible to boot from a few media devices, especially using a micro
> SD or eMMC slots. In this situation, boot device should be registered
> as block device 0 in the MMC framework, because CONFIG_SYS_MMC_ENV_DEV
> is usually set to "0" in the most config cases.
>
> Signed-off-by: Przemyslaw Marczak <p.marc...@samsung.com>
> Cc: Piotr Wilczek <p.wilc...@samsung.com>
> Cc: Minkyu Kang <mk7.k...@samsung.com>
> ---
> board/samsung/common/board.c | 32 ++++++++++++++++++++++++--------
> include/samsung/misc.h | 5 +++++
> 2 files changed, 29 insertions(+), 8 deletions(-)
>
> diff --git a/board/samsung/common/board.c b/board/samsung/common/board.c
> index 9dc7c83..2970340 100644
> --- a/board/samsung/common/board.c
> +++ b/board/samsung/common/board.c
> @@ -25,6 +25,8 @@
> #include <lcd.h>
> #include <samsung/misc.h>
>
> +static int bootmode;
> +
> DECLARE_GLOBAL_DATA_PTR;
>
> int __exynos_early_init_f(void)
> @@ -243,19 +245,33 @@ int board_eth_init(bd_t *bis)
> int board_mmc_init(bd_t *bis)
> {
> int ret;
> + struct exynos4_power *pwr = (struct exynos4_power *)
> + samsung_get_base_power();
Hm, no. This file is samsung common not only for exynos4.
Although this code will not be made any problems for other SoCs (because
om_stat is always first item of power), it looks weird.
I think you can make new function for getting boot mode.
> +
> + bootmode = BOOT_MODE(readl(&pwr->om_stat));
> + if (bootmode == BOOT_SDMMC) {
> +#ifdef CONFIG_SDHCI
> + /* mmc initializattion for available channels */
> + ret = exynos_mmc_init(gd->fdt_blob);
> +#endif
> #ifdef CONFIG_DWMMC
> - /* dwmmc initializattion for available channels */
> - ret = exynos_dwmmc_init(gd->fdt_blob);
> - if (ret)
> - debug("dwmmc init failed\n");
> + /* dwmmc initializattion for available channels */
> + ret = exynos_dwmmc_init(gd->fdt_blob);
> +#endif
> + } else {
> +#ifdef CONFIG_DWMMC
> + /* dwmmc initializattion for available channels */
> + ret = exynos_dwmmc_init(gd->fdt_blob);
> #endif
> -
> #ifdef CONFIG_SDHCI
> - /* mmc initializattion for available channels */
> - ret = exynos_mmc_init(gd->fdt_blob);
> + /* mmc initializattion for available channels */
> + ret = exynos_mmc_init(gd->fdt_blob);
> +#endif
> + }
> +
> if (ret)
> debug("mmc init failed\n");
> -#endif
> +
> return ret;
> }
> #endif
> diff --git a/include/samsung/misc.h b/include/samsung/misc.h
> index 10653a1..87b53ec 100644
> --- a/include/samsung/misc.h
> +++ b/include/samsung/misc.h
> @@ -28,4 +28,9 @@ void check_boot_mode(void);
> void draw_logo(void);
> #endif
>
> +#define BOOT_SDMMC 0x2
> +#define BOOT_MODE_MASK (0x1f)
> +#define BOOT_MODE_SHIFT (0x1)
> +#define BOOT_MODE(x) ((x >> BOOT_MODE_SHIFT) & BOOT_MODE_MASK)
((x) >> BOOT_MODE_SHIFT)
> +
> #endif /* __SAMSUNG_MISC_COMMON_H__ */
>
Thanks,
Minkyu Kang.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
