On 4/1/2014 5:14 AM, Rommel G Custodio wrote:
Rommel G Custodio <sessyargc+u-boot <at> gmail.com> writes:
Dear Prabhakar Kushwaha,
Prabhakar Kushwaha <prabhakar <at> freescale.com> writes:
Add support of 2 stage NAND, SD, SPI boot loader using SPL framework.
here, PBL initialise the internal SRAM and copy SPL(160KB). This further
initialise DDR using SPD and environment and copy u-boot(768 KB) from
NAND
to DDR.
Finally SPL transer control to u-boot.
This patch does not apply to HEAD.
Arrggh ... guess I think I need this
[U-BOOT] [PATCH v3] powerpc/t104xrdb: Unification of T104xRDB header
files
You may also need below patches in sequence
[U-Boot,U-BOOT,v3] powerpc/t104xrdb: Unification of T104xRDB header files
[U-Boot] powerpc/mpc85xx:Add CONFIG_SYS_FSL_ERRATUM_ESDHC111 to Txx/Bxx
[U-Boot,01/2] powerpc/mpc85xx:Avoid fix address of bootpg section
[U-Boot,2/2] powerpc/mpc85xx:Update MONITOR_LEN
[U-Boot] driver/mmc: fix compile warnings
+ 2 stage boot loader patch set
Please let me know, if any other information is required.
Regards,
Prabhakar
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
