Hi Troy,

On 03/29/2014 03:34 PM, Troy Kisky wrote:
This removes one block in the move toward 1 u-boot
for both a mx6q (quad) and mx6dl (duallite) processor.

Now fdt_file hardcoded value can be removed.

Signed-off-by: Troy Kisky <troy.ki...@boundarydevices.com>
---
  arch/arm/imx-common/cpu.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
  arch/arm/lib/board.c      |  7 +++++++
  2 files changed, 51 insertions(+)

diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c
index a77c4de..5d48011 100644
--- a/arch/arm/imx-common/cpu.c
+++ b/arch/arm/imx-common/cpu.c
@@ -180,3 +180,47 @@ void arch_preboot_os(void)
        ipuv3_fb_shutdown();
  }
  #endif
+
+const char *get_dtb_prefix(u32 imxtype)
+{
+       switch (imxtype) {
+       case MXC_CPU_MX6Q:
+       case MXC_CPU_MX6D:
+               return "imx6q";               /* Quad/Dual-core version of the 
mx6 */
+       case MXC_CPU_MX6DL:
+       case MXC_CPU_MX6SOLO:
+               return "imx6dl";      /* Dual Lite/Solo version of the mx6 */
+       case MXC_CPU_MX6SL:
+               return "imx6sl";      /* Solo-Lite version of the mx6 */
+       case MXC_CPU_MX51:
+               return "imx51";
+       case MXC_CPU_MX53:
+               return "imx53";
+       }
+       return "??";
+}
+

I really dislike this implementation of naming policy in code.

+int cpu_late_init(void)
+{
+       char buf[128];
+       const char *board;
+       u32 imxtype = (get_cpu_rev() >> 12) & 0xff;
+
+       if (getenv("fdt_file"))
+               return 0;
+       board = getenv("board");
+       if (!board) {
+               board = CONFIG_SYS_BOARD;

And this part seems to impose a board-naming requirement
to implement the dtb-naming requirement:

+               if ((board[0] == 'm') && (board[1] == 'x')) {
+                       if (board[2] == '6') {
+                               board += 3;
+                       } else if (board[2] == '5') {
+                               if ((board[3] == '1') || (board[3] == '3'))
+                                       board += 4;
+                       }
+               }
+       }
+       sprintf(buf, "%s-%s.dtb", get_dtb_prefix(imxtype), board);
+       setenv("fdt_file", buf);
+       return 0;
+}

I sent patches last year to provide default "cpu" and "board"
environment variables that could be used by boot scripts to
implement this part.

        http://lists.denx.de/pipermail/u-boot/2013-November/thread.html#167129

That seems more generally useful.

Otherwise, I'd rather just see an environment-variable convention.

Regards,


Eric
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to