Hi Alexey,

Looks fine and I'll apply with a small edit to the commit message to
remove the UTF8 characters.

On Dec 26, 2013, at 1:29 PM, Alexey Brodkin wrote:

> Bounce buffer implementation takes care of proper data buffer alignemt
> and correct flush/invalidation of data cache at once so we no longer
> depend on input data variety and make sure CPU and MMC controller deal
> with expected data in case of enabled data cache.
> 
> Bounce buffer requires to add its definition (CONFIG_BOUNCE_BUFFER) in
> board configuration, otherwise corresponding library won't be compiled
> and linker will fail to build resulting executable.
> 
> Difference since v1 - fixed compile-time warning with type casting to
> "void *":
> ====
> passing argument 2 of ‘bounce_buffer_start’ discards ‘const’ qualifier
> from pointer target type
> ====
> 

>    ====
>     passing argument 2 of <E2><80><98>bounce_buffer_start<E2><80><99> 
> discards <E2><80><98>const<E2><80><99> qualifier
>     from pointer target type
>     ====
>  


> Signed-off-by: Alexey Brodkin <abrod...@synopsys.com>
> 
> Cc: Mischa Jonker <mjon...@synopsys.com>
> Cc: Alim Akhtar <alim.akh...@samsung.com>
> Cc: Rajeshwari Shinde <rajeshwar...@samsung.com>
> Cc: Jaehoon Chung <jh80.ch...@samsung.com>
> Cc: Amar <amarendra...@samsung.com>
> Cc: Kyungmin Park <kyungmin.p...@samsung.com>
> Cc: Minkyu Kang <mk7.k...@samsung.com>
> Cc: Simon Glass <s...@chromium.org>
> Cc: Pantelis Antoniou <pa...@antoniou-consulting.com>
> Cc: Andy Fleming <aflem...@gmail.com>
> ---
> drivers/mmc/dw_mmc.c            | 32 ++++++++++++++++++++++----------
> include/configs/arndale.h       |  1 +
> include/configs/exynos5250-dt.h |  1 +
> 3 files changed, 24 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
> index 19d9b0b..1e34f36 100644
> --- a/drivers/mmc/dw_mmc.c
> +++ b/drivers/mmc/dw_mmc.c
> @@ -6,6 +6,7 @@
>  * SPDX-License-Identifier:   GPL-2.0+
>  */
> 
> +#include <bouncebuf.h>
> #include <common.h>
> #include <malloc.h>
> #include <mmc.h>
> @@ -41,11 +42,13 @@ static void dwmci_set_idma_desc(struct dwmci_idmac *idmac,
> }
> 
> static void dwmci_prepare_data(struct dwmci_host *host,
> -             struct mmc_data *data, struct dwmci_idmac *cur_idmac)
> +                            struct mmc_data *data,
> +                            struct dwmci_idmac *cur_idmac,
> +                            void *bounce_buffer)
> {
>       unsigned long ctrl;
>       unsigned int i = 0, flags, cnt, blk_cnt;
> -     ulong data_start, data_end, start_addr;
> +     ulong data_start, data_end;
> 
> 
>       blk_cnt = data->blocks;
> @@ -55,11 +58,6 @@ static void dwmci_prepare_data(struct dwmci_host *host,
>       data_start = (ulong)cur_idmac;
>       dwmci_writel(host, DWMCI_DBADDR, (unsigned int)cur_idmac);
> 
> -     if (data->flags == MMC_DATA_READ)
> -             start_addr = (unsigned int)data->dest;
> -     else
> -             start_addr = (unsigned int)data->src;
> -
>       do {
>               flags = DWMCI_IDMAC_OWN | DWMCI_IDMAC_CH ;
>               flags |= (i == 0) ? DWMCI_IDMAC_FS : 0;
> @@ -70,7 +68,7 @@ static void dwmci_prepare_data(struct dwmci_host *host,
>                       cnt = data->blocksize * 8;
> 
>               dwmci_set_idma_desc(cur_idmac, flags, cnt,
> -                             start_addr + (i * PAGE_SIZE));
> +                                 (u32)bounce_buffer + (i * PAGE_SIZE));
> 
>               if (blk_cnt <= 8)
>                       break;
> @@ -117,6 +115,7 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd 
> *cmd,
>       u32 retry = 10000;
>       u32 mask, ctrl;
>       ulong start = get_timer(0);
> +     struct bounce_buffer bbstate;
> 
>       while (dwmci_readl(host, DWMCI_STATUS) & DWMCI_BUSY) {
>               if (get_timer(start) > timeout) {
> @@ -127,8 +126,19 @@ static int dwmci_send_cmd(struct mmc *mmc, struct 
> mmc_cmd *cmd,
> 
>       dwmci_writel(host, DWMCI_RINTSTS, DWMCI_INTMSK_ALL);
> 
> -     if (data)
> -             dwmci_prepare_data(host, data, cur_idmac);
> +     if (data) {
> +             if (data->flags == MMC_DATA_READ) {
> +                     bounce_buffer_start(&bbstate, (void*)data->dest,
> +                                         data->blocksize *
> +                                         data->blocks, GEN_BB_WRITE);
> +             } else {
> +                     bounce_buffer_start(&bbstate, (void*)data->src,
> +                                         data->blocksize *
> +                                         data->blocks, GEN_BB_READ);
> +             }
> +             dwmci_prepare_data(host, data, cur_idmac,
> +                                bbstate.bounce_buffer);
> +     }
> 
>       dwmci_writel(host, DWMCI_CMDARG, cmd->cmdarg);
> 
> @@ -204,6 +214,8 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd 
> *cmd,
>               ctrl = dwmci_readl(host, DWMCI_CTRL);
>               ctrl &= ~(DWMCI_DMA_EN);
>               dwmci_writel(host, DWMCI_CTRL, ctrl);
> +
> +             bounce_buffer_stop(&bbstate);
>       }
> 
>       udelay(100);
> diff --git a/include/configs/arndale.h b/include/configs/arndale.h
> index a3cb56b..3d29caf 100644
> --- a/include/configs/arndale.h
> +++ b/include/configs/arndale.h
> @@ -85,6 +85,7 @@
> #define CONFIG_DWMMC
> #define CONFIG_EXYNOS_DWMMC
> #define CONFIG_SUPPORT_EMMC_BOOT
> +#define CONFIG_BOUNCE_BUFFER
> 
> 
> #define CONFIG_BOARD_EARLY_INIT_F
> diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
> index 8fb904c..b39bafc 100644
> --- a/include/configs/exynos5250-dt.h
> +++ b/include/configs/exynos5250-dt.h
> @@ -102,6 +102,7 @@
> #define CONFIG_DWMMC
> #define CONFIG_EXYNOS_DWMMC
> #define CONFIG_SUPPORT_EMMC_BOOT
> +#define CONFIG_BOUNCE_BUFFER
> 
> 
> #define CONFIG_BOARD_EARLY_INIT_F
> -- 
> 1.8.4.2
> 

Thanks

Acked-by: Pantelis Antoniou <pa...@antoniou-consulting.com>


_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to