From: Fabio Estevam <fabio.este...@freescale.com>
set_vddsoc() is not used anywhere else, so make it static.
Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
---
Changes since v1:
- None
arch/arm/cpu/armv7/mx6/soc.c | 2 +-
arch/arm/include/asm/arch-mx6/sys_proto.h | 2 --
2 files changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index a390296..6cbade7 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -101,7 +101,7 @@ void init_aips(void)
* Possible values are from 0.725V to 1.450V in steps of
* 0.025V (25mV).
*/
-void set_vddsoc(u32 mv)
+static void set_vddsoc(u32 mv)
{
struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
u32 val, reg = readl(&anatop->reg_core);
diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h
b/arch/arm/include/asm/arch-mx6/sys_proto.h
index 8c21364..17125a6 100644
--- a/arch/arm/include/asm/arch-mx6/sys_proto.h
+++ b/arch/arm/include/asm/arch-mx6/sys_proto.h
@@ -29,8 +29,6 @@ u32 get_cpu_rev(void);
const char *get_imx_type(u32 imxtype);
unsigned imx_ddr_size(void);
-void set_vddsoc(u32 mv);
-
/*
* Initializes on-chip ethernet controllers.
* to override, implement board_eth_init()
--
1.8.1.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
