On smdk5420 two availbale XHCI controllers require VBUS GPIO
to be configured, the EHCI however doesn't have any such VBUS
GPIO. So correcting the available board_usb_vbus_init() function
to the needs.
Signed-off-by: Vivek Gautam <gautam.vi...@samsung.com>
---
board/samsung/smdk5420/smdk5420.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/board/samsung/smdk5420/smdk5420.c
b/board/samsung/smdk5420/smdk5420.c
index 3ad2ad0..4f23000 100644
--- a/board/samsung/smdk5420/smdk5420.c
+++ b/board/samsung/smdk5420/smdk5420.c
@@ -18,14 +18,15 @@
DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_USB_EHCI_EXYNOS
+#ifdef CONFIG_USB_XHCI_EXYNOS
static int board_usb_vbus_init(void)
{
- struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *)
- samsung_get_base_gpio_part1();
+ struct exynos5420_gpio_part4 *gpio4 = (struct exynos5420_gpio_part4 *)
+ samsung_get_base_gpio_part4();
/* Enable VBUS power switch */
- s5p_gpio_direction_output(&gpio1->x2, 6, 1);
+ s5p_gpio_direction_output(&gpio4->g0, 5, 1);
+ s5p_gpio_direction_output(&gpio4->g1, 4, 1);
/* VBUS turn ON time */
mdelay(3);
@@ -36,7 +37,7 @@ static int board_usb_vbus_init(void)
int exynos_init(void)
{
-#ifdef CONFIG_USB_EHCI_EXYNOS
+#ifdef CONFIG_USB_XHCI_EXYNOS
board_usb_vbus_init();
#endif
return 0;
--
1.7.10.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
