Hi Heiko,
Ok will work on same and get back to you in-case of any doubts.
Regards,
Rajehswari
On Tue, Sep 3, 2013 at 12:31 PM, Heiko Schocher <h...@denx.de> wrote:
> Hello Rajeshwari,
>
> Am 03.09.2013 08:20, schrieb Rajeshwari S Shinde:
>
>> This patch fixes the S3C24xx I2C driver as per new I2C
>> multibus/multiadapter support for Exynos5250.
>>
>> Change-Id: I95873fef7d312310670e3bb33ad9532c10f60463
>> Signed-off-by: Rajeshwari S Shinde<rajeshwar...@samsung.com>
>> ---
>> drivers/i2c/s3c24x0_i2c.c | 14 +++++++-------
>> include/configs/exynos5250-dt.h | 3 ++-
>> 2 files changed, 9 insertions(+), 8 deletions(-)
>
>
> Hmm.. could you switch to the new i2c framework instead fixing
> the old state of the driver?
>
> Also there is another board which uses this driver:
>
> [hs@pollux u-boot]$ grep -lr CONFIG_DRIVER_S3C24X0_I2C include/configs/
> include/configs/exynos5250-dt.h
> include/configs/VCMA9.h
> [hs@pollux u-boot]$
>
> Please fix this too, if switching to the new framework ... thanks!
>
>> diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
>> index cd09c78..5fdb85f 100644
>> --- a/drivers/i2c/s3c24x0_i2c.c
>> +++ b/drivers/i2c/s3c24x0_i2c.c
>> @@ -53,7 +53,7 @@
>> static unsigned int g_current_bus __attribute__((section(".data")));
>> #ifdef CONFIG_OF_CONTROL
>> static int i2c_busses __attribute__((section(".data")));
>> -static struct s3c24x0_i2c_bus i2c_bus[CONFIG_MAX_I2C_NUM]
>> +static struct s3c24x0_i2c_bus i2c_bus_data[CONFIG_SYS_NUM_I2C_BUSES]
>> __attribute__((section(".data")));
>> #endif
>>
>> @@ -160,7 +160,7 @@ int i2c_set_bus_num(unsigned int bus)
>> {
>> struct s3c24x0_i2c *i2c;
>>
>> - if ((bus< 0) || (bus>= CONFIG_MAX_I2C_NUM)) {
>> + if ((bus< 0) || (bus>= CONFIG_SYS_NUM_I2C_BUSES)) {
>> debug("Bad bus: %d\n", bus);
>> return -1;
>> }
>> @@ -503,12 +503,12 @@ int i2c_write(uchar chip, uint addr, int alen, uchar
>> *buffer, int len)
>> void board_i2c_init(const void *blob)
>> {
>> int i;
>> - int node_list[CONFIG_MAX_I2C_NUM];
>> + int node_list[CONFIG_SYS_NUM_I2C_BUSES];
>> int count;
>>
>> count = fdtdec_find_aliases_for_id(blob, "i2c",
>> COMPAT_SAMSUNG_S3C2440_I2C, node_list,
>> - CONFIG_MAX_I2C_NUM);
>> + CONFIG_SYS_NUM_I2C_BUSES);
>>
>> for (i = 0; i< count; i++) {
>> struct s3c24x0_i2c_bus *bus;
>> @@ -516,7 +516,7 @@ void board_i2c_init(const void *blob)
>>
>> if (node<= 0)
>> continue;
>> - bus =&i2c_bus[i];
>> + bus =&i2c_bus_data[i];
>>
>> bus->regs = (struct s3c24x0_i2c *)
>> fdtdec_get_addr(blob, node, "reg");
>> bus->id = pinmux_decode_periph_id(blob, node);
>> @@ -529,7 +529,7 @@ void board_i2c_init(const void *blob)
>> static struct s3c24x0_i2c_bus *get_bus(unsigned int bus_idx)
>> {
>> if (bus_idx< i2c_busses)
>> - return&i2c_bus[bus_idx];
>> + return&i2c_bus_data[bus_idx];
>>
>>
>> debug("Undefined bus: %d\n", bus_idx);
>> return NULL;
>> @@ -540,7 +540,7 @@ int i2c_get_bus_num_fdt(int node)
>> int i;
>>
>> for (i = 0; i< i2c_busses; i++) {
>> - if (node == i2c_bus[i].node)
>> + if (node == i2c_bus_data[i].node)
>> return i;
>> }
>>
>> diff --git a/include/configs/exynos5250-dt.h
>> b/include/configs/exynos5250-dt.h
>> index 2b93a45..e6a2cd0 100644
>> --- a/include/configs/exynos5250-dt.h
>> +++ b/include/configs/exynos5250-dt.h
>> @@ -254,8 +254,9 @@
>> #define CONFIG_SYS_I2C_SPEED 100000 /* 100 Kbps */
>> #define CONFIG_DRIVER_S3C24X0_I2C
>> #define CONFIG_I2C_MULTI_BUS
>
>
> no longer needed, if you use the new framework ...
>
>
>> -#define CONFIG_MAX_I2C_NUM 8
>> #define CONFIG_SYS_I2C_SLAVE 0x0
>> +#define CONFIG_SYS_I2C_MAX_HOPS 1
>
>
> you do not need the CONFIG_SYS_I2C_MAX_HOPS define, this define is
> only needed, if using muxes and using the new framework ...
>
>> +#define CONFIG_SYS_NUM_I2C_BUSES 8
>
>
> no longer needed if you use the new framework ...
>
>
>> #define CONFIG_I2C_EDID
>>
>> /* PMIC */
>
>
> I prefer to switch to the new framework, such it is done for the
> tegra driver, see commit:
>
> http://git.denx.de/?p=u-boot.git;a=commitdiff;h=1f2ba722ac06393d6abe6d4734824d3b98ea9108
>
> maybe a fix like this is for you also necessary, as you use fdt:
>
> http://git.denx.de/?p=u-boot.git;a=commitdiff;h=cdce889959c611876690a9f0a3c7ed9aa46189c4
>
> bye,
> Heiko
> --
> DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
--
Regards,
Rajeshwari Shinde
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
