Hello Rajeshwari,
Am 03.09.2013 08:20, schrieb Rajeshwari S Shinde:
This patch fixes the S3C24xx I2C driver as per new I2C
multibus/multiadapter support for Exynos5250.
Change-Id: I95873fef7d312310670e3bb33ad9532c10f60463
Signed-off-by: Rajeshwari S Shinde<rajeshwar...@samsung.com>
---
drivers/i2c/s3c24x0_i2c.c | 14 +++++++-------
include/configs/exynos5250-dt.h | 3 ++-
2 files changed, 9 insertions(+), 8 deletions(-)
Hmm.. could you switch to the new i2c framework instead fixing
the old state of the driver?
Also there is another board which uses this driver:
[hs@pollux u-boot]$ grep -lr CONFIG_DRIVER_S3C24X0_I2C include/configs/
include/configs/exynos5250-dt.h
include/configs/VCMA9.h
[hs@pollux u-boot]$
Please fix this too, if switching to the new framework ... thanks!
diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
index cd09c78..5fdb85f 100644
--- a/drivers/i2c/s3c24x0_i2c.c
+++ b/drivers/i2c/s3c24x0_i2c.c
@@ -53,7 +53,7 @@
static unsigned int g_current_bus __attribute__((section(".data")));
#ifdef CONFIG_OF_CONTROL
static int i2c_busses __attribute__((section(".data")));
-static struct s3c24x0_i2c_bus i2c_bus[CONFIG_MAX_I2C_NUM]
+static struct s3c24x0_i2c_bus i2c_bus_data[CONFIG_SYS_NUM_I2C_BUSES]
__attribute__((section(".data")));
#endif
@@ -160,7 +160,7 @@ int i2c_set_bus_num(unsigned int bus)
{
struct s3c24x0_i2c *i2c;
- if ((bus< 0) || (bus>= CONFIG_MAX_I2C_NUM)) {
+ if ((bus< 0) || (bus>= CONFIG_SYS_NUM_I2C_BUSES)) {
debug("Bad bus: %d\n", bus);
return -1;
}
@@ -503,12 +503,12 @@ int i2c_write(uchar chip, uint addr, int alen, uchar
*buffer, int len)
void board_i2c_init(const void *blob)
{
int i;
- int node_list[CONFIG_MAX_I2C_NUM];
+ int node_list[CONFIG_SYS_NUM_I2C_BUSES];
int count;
count = fdtdec_find_aliases_for_id(blob, "i2c",
COMPAT_SAMSUNG_S3C2440_I2C, node_list,
- CONFIG_MAX_I2C_NUM);
+ CONFIG_SYS_NUM_I2C_BUSES);
for (i = 0; i< count; i++) {
struct s3c24x0_i2c_bus *bus;
@@ -516,7 +516,7 @@ void board_i2c_init(const void *blob)
if (node<= 0)
continue;
- bus =&i2c_bus[i];
+ bus =&i2c_bus_data[i];
bus->regs = (struct s3c24x0_i2c *)
fdtdec_get_addr(blob, node, "reg");
bus->id = pinmux_decode_periph_id(blob, node);
@@ -529,7 +529,7 @@ void board_i2c_init(const void *blob)
static struct s3c24x0_i2c_bus *get_bus(unsigned int bus_idx)
{
if (bus_idx< i2c_busses)
- return&i2c_bus[bus_idx];
+ return&i2c_bus_data[bus_idx];
debug("Undefined bus: %d\n", bus_idx);
return NULL;
@@ -540,7 +540,7 @@ int i2c_get_bus_num_fdt(int node)
int i;
for (i = 0; i< i2c_busses; i++) {
- if (node == i2c_bus[i].node)
+ if (node == i2c_bus_data[i].node)
return i;
}
diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
index 2b93a45..e6a2cd0 100644
--- a/include/configs/exynos5250-dt.h
+++ b/include/configs/exynos5250-dt.h
@@ -254,8 +254,9 @@
#define CONFIG_SYS_I2C_SPEED 100000 /* 100 Kbps */
#define CONFIG_DRIVER_S3C24X0_I2C
#define CONFIG_I2C_MULTI_BUS
no longer needed, if you use the new framework ...
-#define CONFIG_MAX_I2C_NUM 8
#define CONFIG_SYS_I2C_SLAVE 0x0
+#define CONFIG_SYS_I2C_MAX_HOPS 1
you do not need the CONFIG_SYS_I2C_MAX_HOPS define, this define is
only needed, if using muxes and using the new framework ...
+#define CONFIG_SYS_NUM_I2C_BUSES 8
no longer needed if you use the new framework ...
#define CONFIG_I2C_EDID
/* PMIC */
I prefer to switch to the new framework, such it is done for the
tegra driver, see commit:
http://git.denx.de/?p=u-boot.git;a=commitdiff;h=1f2ba722ac06393d6abe6d4734824d3b98ea9108
maybe a fix like this is for you also necessary, as you use fdt:
http://git.denx.de/?p=u-boot.git;a=commitdiff;h=cdce889959c611876690a9f0a3c7ed9aa46189c4
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot