Dear Sascha Silbe, In message <toetxjq8t90....@twin.sascha.silbe.org> you wrote: > > FWIW, I like the idea. Apart from streamlining the current code, it > would allow building custom chains of bootloaders. One thing I could use > for development would be a minimal stage that can load one of two > "normal" / full-blown U-Boot versions, similar to dual BIOS support on > modern x86 PCs. All devices I work with can be un-bricked reasonably > easily, but for most of them it either requires manual interaction > (e.g. the push-button for UART boot on CuBox) or prevents "normal" boots > (e.g. removing the SD card on Wandboard so that it boots via USB > _instead_ of from SD card).
I think this could be done easily using SPL (look up the Falcon mode docs). Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de In my experience the best way to get something done is to give it to someone who is busy. - Terry Pratchett, _Going_Postal_ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
