On Fri, 05 Jul 2013 13:17:07 +0900, Jaehoon Chung wrote:
> On 07/04/2013 07:52 PM, Lukasz Majewski wrote:
> > From: Arkadiusz Wlodarczyk <a.wlodarc...@samsung.com>
> >
> > Configuration file for GONI has been updated to support FAT file
> > system, new mmc partitioning scheme and read linux kernel from eMMC
> > instead of OneNAND.
> >
> > Signed-off-by: Arkadiusz Wlodarczyk <a.wlodarc...@samsung.com>
> > Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com>
> > Tested-by: Arkadiusz Wlodarczyk <a.wlodarc...@samsung.com>
> > Cc: Minkyu Kang <mk7.k...@samsung.com>
> > ---
> > include/configs/s5p_goni.h | 17 +++++++++++++----
> > 1 file changed, 13 insertions(+), 4 deletions(-)
> >
> > diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
> > index 56e8347..ec43652 100644
> > --- a/include/configs/s5p_goni.h
> > +++ b/include/configs/s5p_goni.h
> > @@ -107,7 +107,7 @@
> >
> > #define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
> >
> > -#define CONFIG_BOOTCOMMAND "run ubifsboot"
> > +#define CONFIG_BOOTCOMMAND "run mmcboot"
> >
> > #define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
> >
> > @@ -137,7 +137,7 @@
> > "onenand erase 0x01560000 0x1eaa0000;" \
> > "onenand write 0x32000000 0x1260000 0x8C0000\0" \
> > "bootk=" \
> > - "onenand read 0x30007FC0 0xc00000 0x600000;" \
> > + "run loaduimage;" \
> > "bootm 0x30007FC0\0" \
> > "flashboot=" \
> > "set bootargs root=/dev/mtdblock${bootblock} " \
> > @@ -156,16 +156,21 @@
> > "set bootargs " CONFIG_RAMDISK_BOOT \
> > " initrd=0x33000000,8M ramdisk=8192\0" \
> > "mmcboot=" \
> > - "set bootargs root=${mmcblk}
> > rootfstype=${rootfstype}" \
> > + "set bootargs
> > root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
> > + "rootfstype=${rootfstype}" \
> Could you add the "rootwait"?
Yes, correct. Thanks for pointing.
> > CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \
> > CONFIG_COMMON_BOOT "; run bootk\0" \
> > "boottrace=setenv opts initcall_debug; run bootcmd\0" \
> > "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
> > "verify=n\0" \
> > - "rootfstype=cramfs\0" \
> > + "rootfstype=ext4\0" \
> > "console=" CONFIG_DEFAULT_CONSOLE \
> > "mtdparts=" MTDPARTS_DEFAULT \
> > "meminfo=mem=80M mem=256M@0x40000000
> > mem=128M@0x50000000\0" \
> > + "loaduimage=fatload mmc ${mmcdev}:${mmcbootpart}
> > 0x30007FC0 uImage\0" \
> > + "mmcdev=0\0" \
> > + "mmcbootpart=2\0" \
> > + "mmcrootpart=5\0" \
> > "mmcblk=/dev/mmcblk1p1\0" \
> mmcblk can be removed?
Yes, it seems redundant here.
>
> Best Regards,
> Jaehoon Chung
> > "bootblock=9\0" \
> > "ubiblock=8\0" \
> > @@ -211,6 +216,10 @@
> >
> > #define CONFIG_DOS_PARTITION 1
> >
> > +/* FAT */
> > +#define CONFIG_CMD_FAT
> > +#define CONFIG_FAT_WRITE
> > +
> > #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR -
> > 0x1000000)
> > #define CONFIG_SYS_CACHELINE_SIZE 64
> >
>
Thanks for review.
--
Best regards,
Lukasz Majewski
Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
