On 08/07/13 15:19, Lukasz Majewski wrote:
> On Sun, 07 Jul 2013 14:48:18 +0900, Minkyu Kang wrote:
>
> Dear Minkyu,
>
>> Dear Lukasz,
>>
>>
>> On 4 July 2013 19:52, Lukasz Majewski <l.majew...@samsung.com> wrote:
>>
>>> From: Arkadiusz Wlodarczyk <a.wlodarc...@samsung.com>
>>>
>>> Proper adjustment for supporting DFU at GONI target has been made.
>>> The s5p_goni.h file has been updated. Moreover the code for low
>>> level USB initialization has been added to GONI board code.
>>>
>>> Signed-off-by: Arkadiusz Wlodarczyk <a.wlodarc...@samsung.com>
>>> Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com>
>>> Tested-by: Arkadiusz Wlodarczyk <a.wlodarc...@samsung.com>
>>> Cc: Minkyu Kang <mk7.k...@samsung.com>
>>> ---
>>>
>>
>> Please add change log here.
>> And this patch seem version 3 (or 2?), but you did not mention it.
>
> To be honest it is RESEND to v2 of this patch. Since v2 didn't applied
> to u-boot-samsung/master branch.
why you resend v1 patch?
>
> Why I did resend? You have only replied on the PATCH 2/4 and I thought
> that other patches are still under review. I didn't want to send v3
> over patches which might be under review.
Suit yourself.
>
>>
>>
>>> board/samsung/goni/goni.c | 7 +++++++
>>> include/configs/s5p_goni.h | 20 +++++++++++++++++++-
>>> 2 files changed, 26 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c
>>> index ff76963..3c53106 100644
>>> --- a/board/samsung/goni/goni.c
>>> +++ b/board/samsung/goni/goni.c
>>> @@ -155,4 +155,11 @@ struct s3c_plat_otg_data s5pc110_otg_data = {
>>> .regs_otg = S5PC110_OTG_BASE,
>>> .usb_phy_ctrl = S5PC110_USB_PHY_CONTROL,
>>> };
>>> +
>>> +void board_usb_init(void)
>>> +{
>>> + debug("USB_udc_probe\n");
>>> + s3c_udc_probe(&s5pc110_otg_data);
>>> +}
>>> +
>>> #endif
>>> diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
>>> index ec43652..8a824c7 100644
>>> --- a/include/configs/s5p_goni.h
>>> +++ b/include/configs/s5p_goni.h
>>> @@ -86,6 +86,17 @@
>>> #define CONFIG_CMD_ONENAND
>>> #define CONFIG_CMD_MTDPARTS
>>> #define CONFIG_CMD_MMC
>>> +#define CONFIG_CMD_DFU
>>> +
>>> +/* USB Composite download gadget - g_dnl */
>>> +#define CONFIG_USBDOWNLOAD_GADGET
>>> +#define CONFIG_DFU_FUNCTION
>>> +#define CONFIG_DFU_MMC
>>> +
>>> +/* USB Samsung's IDs */
>>> +#define CONFIG_G_DNL_VENDOR_NUM 0x04E8
>>> +#define CONFIG_G_DNL_PRODUCT_NUM 0x6601
>>> +#define CONFIG_G_DNL_MANUFACTURER "Samsung"
>>>
>>> #define CONFIG_BOOTDELAY 1
>>> #define CONFIG_ZERO_BOOTDELAY_CHECK
>>> @@ -105,6 +116,10 @@
>>> ",60m(qboot)"\
>>> ",-(UBI)\0"
>>>
>>> +#define CONFIG_DFU_ALT \
>>> + "u-boot mmc 80 400;" \
>>> + "uImage fat 0 2\0" \
>>> +
>>> #define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
>>>
>>> #define CONFIG_BOOTCOMMAND "run mmcboot"
>>> @@ -175,7 +190,9 @@
>>> "bootblock=9\0" \
>>> "ubiblock=8\0" \
>>> "ubi=enabled\0" \
>>> - "opts=always_resume=1"
>>> + "opts=always_resume=1\0" \
>>> + "dfu_alt_info=" CONFIG_DFU_ALT
>>> +
>>>
>>
>> seems redundant blank line.
>
> Ok.
>
>>
>>
>>>
>>> /* Miscellaneous configurable options */
>>> #define CONFIG_SYS_LONGHELP /* undef to save memory */
>>> @@ -242,5 +259,6 @@
>>> #define CONFIG_USB_GADGET
>>> #define CONFIG_USB_GADGET_S3C_UDC_OTG
>>> #define CONFIG_USB_GADGET_DUALSPEED
>>> +#define CONFIG_USB_GADGET_VBUS_DRAW 2
>>>
>>> #endif /* __CONFIG_H */
>>> --
>>> 1.7.10.4
>>>
>>> _______________________________________________
>>> U-Boot mailing list
>>> U-Boot@lists.denx.de
>>> http://lists.denx.de/mailman/listinfo/u-boot
>>>
>>
>>
>> Thanks,
>> Minkyu Kang.
>
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
