Hi Lukasz,
sorry i just copy and paste that...
"why dfu-SPL? Not dfu-BOOT"
dfu-Boot will come instead of dfu-SPL
and thanks for help, i talk to Pantelis, Heiko for the same.
Thanks & Regards
~Sumit Gemini
On Tue, Jun 25, 2013 at 1:05 PM, Lukasz Majewski <l.majew...@samsung.com>wrote:
> Hi Sumit,
>
> > Hi Lukasz,
> >
> > My dfu version is 1.0 and am using SPI flash NOR. downloading is
> > fine but uploading failed.
> >
> > I am trying lot to upload binary from dfu-device to pc but not
> > able to do that.
> >
> > I am facing following error :-
> >
> > when i apply
> > dfu-util -v -a u-boot -U dfu-UBOOT from my host
> > machine,
> >
> >
> > I got such log on Host machine :-
> >
> > Device returned transfer size 4096
> > bytes_per_hash=4096
> > Copying data from DFU device to PC
> > Starting upload: [] finished!
> > Received a total of 1 bytes
> >
> > and finally dfu-SPL file created with 4kb size.
>
> Why dfu-SPL? Not dfu-BOOT? (you are calling the dfu-util command with
> -U dfu-UBOOT)
>
> >
> >
> > but on target machine, i got
> >
> > Running: sf read 0x00000000 0x20000 0x0
> > Failed to map physical memory.
>
> I'm not the right person to answer. You ought to ask Tom Rini or
> other developers involved in flash development (e.g. Pantelis, Heiko).
>
> >
> > May i know why i got such error or user have to specify address over
> > which we read our binary.
> >
> >
> > Any help will appreciate and if any body has related pointer, please
> > let me know, I have stuck in this error.
> >
> > and further more,
> >
> > After analyzing a lot, i got a function "dfu_upload" in dfu.c file,
> > calling another function "libusb_control_transfer" which return only
> > 1, might be it is not getting interface, because when i pass
> >
> > dfu-util -a u-boot -U SPL-uboot in host machine
> >
> >
> > i got in target machine :-
> >
> > SF: Detected N25Q256 with page size 64 KiB, total 32 MiB
> >
> > Running: sf read 0x00000000 0x20000 0x0
> > Failed to map physical memory
> >
> > So, how can i analyze flash memory, why it is getting fail to map
> > itself with physical memory.
> >
>
> What I can do is to check if the USB gadget DFU layer works with
> upload. With the NAND backend I'm not able to help much here (I don't
> have NAND memory on my targets).
>
> >
> > Thanks
> >
> >
> > On Tue, Jun 25, 2013 at 12:14 PM, Lukasz Majewski
> > <l.majew...@samsung.com>wrote:
> >
> > > Hi Sumit,
> > >
> > > > Hi Lukasz,
> > > >
> > > > I put the dfu support into am335x board even i able to
> > > > download all images from dfu-util, but when i trying to upload
> > > > images, (from dfu devices to PC), my system failed.
> > > >
> > > > Could you tell me what is the problem and where should i look
> > > > into?
> > >
> > > Indeed dfu upload doesn't work on Trats anymore (it uses eMMC
> > > backend). I've checked and fixed problem with dfu write yesterday
> > > (also with eMMC).
> > >
> > > Recently the dfu subsystem has been reworked to get rid of fixed
> > > buffer size, so please regard it as "under heavy development".
> > >
> > > I will look into this problem (for eMMC, not NAND - since my Trats
> > > doesn't have NAND memory).
> > >
> > > BTW: Which version of dfu-util do you use? (Mine is 0.5, but for
> > > debian 5.0 / 6.0 there also was very ancient 0.1 version - which
> > > doesn't work with current dfu code).
> > >
> > >
> > >
> > > >
> > > >
> > > > Thanks & Regards
> > > > ~Sumit gemini
> > > >
> > > >
> > > > On Mon, Jun 24, 2013 at 9:06 PM, Lukasz Majewski
> > > > <l.majew...@samsung.com>wrote:
> > > >
> > > > > From: Arkadiusz Wlodarczyk <a.wlodarc...@samsung.com>
> > > > >
> > > > > Proper adjustment for supporting DFU at GONI target has been
> > > > > made. The s5p_goni.h file has been updated. Moreover the code
> > > > > for low level USB initialization has been added to GONI board
> > > > > code.
> > > > >
> > > > > Signed-off-by: Arkadiusz Wlodarczyk <a.wlodarc...@samsung.com>
> > > > > Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com>
> > > > > Tested-by: Arkadiusz Wlodarczyk <a.wlodarc...@samsung.com>
> > > > > Cc: Minkyu Kang <mk7.k...@samsung.com>
> > > > > ---
> > > > > board/samsung/goni/goni.c | 7 +++++++
> > > > > include/configs/s5p_goni.h | 20 +++++++++++++++++++-
> > > > > 2 files changed, 26 insertions(+), 1 deletion(-)
> > > > >
> > > > > diff --git a/board/samsung/goni/goni.c
> > > > > b/board/samsung/goni/goni.c index ff76963..3c53106 100644
> > > > > --- a/board/samsung/goni/goni.c
> > > > > +++ b/board/samsung/goni/goni.c
> > > > > @@ -155,4 +155,11 @@ struct s3c_plat_otg_data s5pc110_otg_data
> > > > > = { .regs_otg = S5PC110_OTG_BASE,
> > > > > .usb_phy_ctrl = S5PC110_USB_PHY_CONTROL,
> > > > > };
> > > > > +
> > > > > +void board_usb_init(void)
> > > > > +{
> > > > > + debug("USB_udc_probe\n");
> > > > > + s3c_udc_probe(&s5pc110_otg_data);
> > > > > +}
> > > > > +
> > > > > #endif
> > > > > diff --git a/include/configs/s5p_goni.h
> > > > > b/include/configs/s5p_goni.h index ec43652..8a824c7 100644
> > > > > --- a/include/configs/s5p_goni.h
> > > > > +++ b/include/configs/s5p_goni.h
> > > > > @@ -86,6 +86,17 @@
> > > > > #define CONFIG_CMD_ONENAND
> > > > > #define CONFIG_CMD_MTDPARTS
> > > > > #define CONFIG_CMD_MMC
> > > > > +#define CONFIG_CMD_DFU
> > > > > +
> > > > > +/* USB Composite download gadget - g_dnl */
> > > > > +#define CONFIG_USBDOWNLOAD_GADGET
> > > > > +#define CONFIG_DFU_FUNCTION
> > > > > +#define CONFIG_DFU_MMC
> > > > > +
> > > > > +/* USB Samsung's IDs */
> > > > > +#define CONFIG_G_DNL_VENDOR_NUM 0x04E8
> > > > > +#define CONFIG_G_DNL_PRODUCT_NUM 0x6601
> > > > > +#define CONFIG_G_DNL_MANUFACTURER "Samsung"
> > > > >
> > > > > #define CONFIG_BOOTDELAY 1
> > > > > #define CONFIG_ZERO_BOOTDELAY_CHECK
> > > > > @@ -105,6 +116,10 @@
> > > > > ",60m(qboot)"\
> > > > > ",-(UBI)\0"
> > > > >
> > > > > +#define CONFIG_DFU_ALT \
> > > > > + "u-boot mmc 80 400;" \
> > > > > + "uImage fat 0 2\0" \
> > > > > +
> > > > > #define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
> > > > >
> > > > > #define CONFIG_BOOTCOMMAND "run mmcboot"
> > > > > @@ -175,7 +190,9 @@
> > > > > "bootblock=9\0" \
> > > > > "ubiblock=8\0" \
> > > > > "ubi=enabled\0" \
> > > > > - "opts=always_resume=1"
> > > > > + "opts=always_resume=1\0" \
> > > > > + "dfu_alt_info=" CONFIG_DFU_ALT
> > > > > +
> > > > >
> > > > > /* Miscellaneous configurable options */
> > > > > #define CONFIG_SYS_LONGHELP /* undef to save memory
> > > > > */ @@ -242,5 +259,6 @@
> > > > > #define CONFIG_USB_GADGET
> > > > > #define CONFIG_USB_GADGET_S3C_UDC_OTG
> > > > > #define CONFIG_USB_GADGET_DUALSPEED
> > > > > +#define CONFIG_USB_GADGET_VBUS_DRAW 2
> > > > >
> > > > > #endif /* __CONFIG_H */
> > > > > --
> > > > > 1.7.10.4
> > > > >
> > > > > _______________________________________________
> > > > > U-Boot mailing list
> > > > > U-Boot@lists.denx.de
> > > > > http://lists.denx.de/mailman/listinfo/u-boot
> > > > >
> > >
> > >
> > >
> > > --
> > > Best regards,
> > >
> > > Lukasz Majewski
> > >
> > > Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
> > >
>
>
>
> --
> Best regards,
>
> Lukasz Majewski
>
> Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
