On Tuesday 31 March 2009, Wolfgang Denk wrote: > In message <20090331192117.gf24...@game.jcrosoft.org> you wrote: > > > > drivers/usb/Makefile > | 1 + > > > > .../at91/usb.c => drivers/usb/atmel_usb.c | > 0 > > > > rename cpu/arm926ejs/at91/usb.c => drivers/usb/atmel_usb.c (100%) > > > > > > Same here, this is architecture specific code, why move it to generic > > > cod> e? > > > > it's the at91 usb drivers and we need to have it in the driver/usb > > Why do we need to have it in the driver/usb ? > > Please explain in detail.
>From what I remember we all agreed to move the device drivers (e.g. ethernet, NAND, USB, serial etc) from the architecture/board (cpu/... board/...) to the drivers directories at some time. Speaking for PPC4xx, the 4xx ethernet driver has recently been moved from cpu/ppc4xx to drivers/net. And I'm planning to move the 4xx NAND driver (and others) soon too. So if this atmel_usb.c driver isn't just platform USB init code, but a real USB driver, then I'm voting to move it to drivers/usb as well. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
