On 09:25 Wed 01 Apr , Remy Bohmer wrote: > Hello Stefan, > > > From what I remember we all agreed to move the device drivers (e.g. > > ethernet, > > NAND, USB, serial etc) from the architecture/board (cpu/... board/...) to > > the > > drivers directories at some time. > > > > Speaking for PPC4xx, the 4xx ethernet driver has recently been moved from > > cpu/ppc4xx to drivers/net. And I'm planning to move the 4xx NAND driver (and > > others) soon too. > > > > So if this atmel_usb.c driver isn't just platform USB init code, but a real > > USB driver, then I'm voting to move it to drivers/usb as well. > > And that is exactly the issue here. The discussion is about moving > 'platform USB init code' to generic driver code. > I would have no problems with moving real USB drivers to the generic > driver section, if they are cleaned from board specific code, of > course. in our case it's not a cpu specify init but an IP init which is share to multiple soc for multiple arch
Best Regards, J. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
