Hi Tom,
On Fri, 10 May 2013 09:16:18 -0400, Tom Rini <tr...@ti.com> wrote:
> Hello,
>
> The following changes since commit 8934f7846501070a5b01c1fab5db27559e9d70d1:
>
> i2c: zynq: Add support for Xilinx Zynq (2013-04-30 11:39:28 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-ti.git master
>
> for you to fetch changes up to 47c6ea076eb51e624f8744d93db5cd70b97dc25d:
>
> ARM: OMAP: Add arch_cpu_init function (2013-05-10 08:25:56 -0400)
>
> ----------------------------------------------------------------
> Dan Murphy (2):
> ARM:Panda:Fix device tree loading for the panda-es
> ARM: Panda: Add flag to allow runtime enviroment varibale mods
>
> Enric Balletbo i Serra (2):
> Add DDR3 support for IGEP COM AQUILA/CYGNUS.
> ARM: Add support for IGEP COM AQUILA/CYGNUS
>
> Eric Benard (2):
> da850: provide davinci_enable_uart0
> davinci: handle CONFIG_SYS_CLE_MASK and CONFIG_SYS_ALE_MASK
>
> Igor Grinberg (3):
> cm-t35: move cm-t35 to live in compulab directory
> MAINTAINERS: fix the cm-t35 board name
> cm-t35: update config file
>
> Lokesh Vutla (2):
> arm: omap: emif: Fix DDR3 init after warm reset
> ARM: OMAP5: Fix warm reset with USB cable connected
>
> Lubomir Popov (4):
> OMAP5: I2C: Enable i2c5 clocks
> OMAP5: I2C: Add I2C4 and I2C5 bases
> OMAP5: I2C: Set I2C_BUS_MAX to 5 to enable I2C4 and I2C5
> OMAP5: USB: hsusbtll_clkctrl has to be in hw_auto for USB to work
>
> Mark Jackson (1):
> Remove duplicate / unused #defines on AM335x boards
>
> Matt Porter (4):
> am33xx: add pll and clock support for TI814x CPSW
> cpsw: add support for TI814x slave_regs differences
> phy: add support for ET1011C phys
> ti814x_evm: enable CPSW support
>
> Nishanth Menon (10):
> twl4030: make twl4030_i2c_write_u8 prototype consistent
> twl4030: make twl4030_i2c_read_u8 prototype consistent
> twl6030: twl6030_i2c_[read|write]_u8 prototype consistent
> twl6030: move twl6030 register access functions to common header file
> twl6030: add header guard
> twl6035: rename to palmas
> palmas: rename init_settings to an generic palmas init
> palmas: rename twl6035_mmc1_poweron_ldo with an palmas generic function
> palmas: use palmas_i2c_[read|write]_u8
> palmas: add header guard
>
> SRICHARAN R (5):
> ARM: OMAP: Make omap_boot_parameters common across socs
> ARM: OMAP4/5: Make OMAPx_SRAM_SCRATCH_ defines common
> ARM: OMAP: Correct save_boot_params and replace with 'C' function
> ARM: OMAP: Cleanup boot parameters usage
> ARM: OMAP: Add arch_cpu_init function
>
> Tom Rini (3):
> beagleboard: Update comment in get_board_rev()
> omap5_common: Add optargs variable for kernel command line args
> am33xx: Fix warning with CONFIG_DISPLAY_CPUINFO
>
> MAINTAINERS | 3 +-
> README | 4 +
> arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 8 +
> arch/arm/cpu/armv7/am33xx/clock_ti814x.c | 103 ++++++-
> arch/arm/cpu/armv7/am33xx/sys_info.c | 6 +-
> arch/arm/cpu/armv7/lowlevel_init.S | 8 +-
> arch/arm/cpu/armv7/omap-common/boot-common.c | 31 +--
> arch/arm/cpu/armv7/omap-common/clocks-common.c | 1 +
> arch/arm/cpu/armv7/omap-common/emif-common.c | 11 +-
> arch/arm/cpu/armv7/omap-common/hwinit-common.c | 61 ++++-
> arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 50 +---
> arch/arm/cpu/armv7/omap-common/reset.c | 4 +
> arch/arm/cpu/armv7/omap4/emif.c | 4 +-
> arch/arm/cpu/armv7/omap4/hw_data.c | 2 +-
> arch/arm/cpu/armv7/omap4/hwinit.c | 3 +-
> arch/arm/cpu/armv7/omap5/emif.c | 4 +-
> arch/arm/cpu/armv7/omap5/hw_data.c | 5 +-
> arch/arm/cpu/armv7/omap5/hwinit.c | 22 +-
> arch/arm/cpu/armv7/omap5/prcm-regs.c | 2 +
> arch/arm/include/asm/arch-am33xx/ddr_defs.h | 17 ++
> arch/arm/include/asm/arch-am33xx/hardware_ti814x.h | 1 +
> arch/arm/include/asm/arch-am33xx/omap.h | 25 --
> arch/arm/include/asm/arch-davinci/hardware.h | 2 +
> arch/arm/include/asm/arch-davinci/nand_defs.h | 9 +
> arch/arm/include/asm/arch-omap4/omap.h | 36 ---
> arch/arm/include/asm/arch-omap4/sys_proto.h | 12 +-
> arch/arm/include/asm/arch-omap5/clocks.h | 10 +
> arch/arm/include/asm/arch-omap5/cpu.h | 2 +
> arch/arm/include/asm/arch-omap5/i2c.h | 2 +-
> arch/arm/include/asm/arch-omap5/omap.h | 36 ---
> arch/arm/include/asm/arch-omap5/sys_proto.h | 22 +-
> arch/arm/include/asm/global_data.h | 8 +
> arch/arm/include/asm/omap_boot.h | 50 ++++
> arch/arm/include/asm/omap_common.h | 20 ++
> board/{ => compulab}/cm_t35/Makefile | 12 +-
> board/{ => compulab}/cm_t35/cm_t35.c | 26 +-
> board/{ => compulab}/cm_t35/display.c | 2 +-
> board/{ => compulab}/cm_t35/eeprom.c | 0
> board/{ => compulab}/cm_t35/eeprom.h | 0
> board/{ => compulab}/cm_t35/leds.c | 3 +-
> board/isee/igep0033/Makefile | 46 ++++
> board/isee/igep0033/board.c | 232 ++++++++++++++++
> board/isee/igep0033/board.h | 27 ++
> board/isee/igep0033/mux.c | 89 ++++++
> board/nokia/rx51/rx51.c | 52 ++--
> board/pandora/pandora.c | 3 +-
> board/ti/beagle/beagle.c | 5 +-
> board/ti/dra7xx/evm.c | 2 +-
> board/ti/omap5_uevm/evm.c | 6 +-
> board/ti/panda/panda.c | 6 +
> board/ti/ti814x/evm.c | 75 +++++
> board/ti/ti814x/evm.h | 1 +
> board/ti/ti814x/mux.c | 35 +++
> boards.cfg | 3 +-
> common/spl/spl.c | 10 +-
> doc/README.omap-reset-time | 20 ++
> drivers/misc/twl4030_led.c | 4 +-
> drivers/mmc/omap_hsmmc.c | 8 +-
> drivers/net/cpsw.c | 6 +
> drivers/net/phy/Makefile | 1 +
> drivers/net/phy/et1011c.c | 110 ++++++++
> drivers/net/phy/phy.c | 3 +
> drivers/power/Makefile | 2 +-
> drivers/power/{twl6035.c => palmas.c} | 34 +--
> drivers/power/twl4030.c | 16 +-
> drivers/power/twl6030.c | 75 +++--
> drivers/usb/phy/twl4030.c | 48 ++--
> include/configs/am335x_evm.h | 14 +-
> include/configs/cm_t35.h | 18 +-
> include/configs/da830evm.h | 4 +-
> include/configs/da850evm.h | 4 +-
> include/configs/enbw_cmc.h | 4 +-
> include/configs/igep0033.h | 288
> ++++++++++++++++++++
> include/configs/omap4_common.h | 8 +-
> include/configs/omap4_panda.h | 2 +
> include/configs/omap5_common.h | 5 +
> include/configs/omap5_uevm.h | 3 +-
> include/configs/pcm051.h | 8 +-
> include/configs/ti814x_evm.h | 25 ++
> include/configs/tnetv107x_evm.h | 4 +-
> include/{twl6035.h => palmas.h} | 28 +-
> include/phy.h | 1 +
> include/spl.h | 1 -
> include/twl4030.h | 4 +-
> include/twl6030.h | 16 ++
> 85 files changed, 1561 insertions(+), 422 deletions(-)
> create mode 100644 arch/arm/include/asm/omap_boot.h
> rename board/{ => compulab}/cm_t35/Makefile (82%)
> rename board/{ => compulab}/cm_t35/cm_t35.c (96%)
> rename board/{ => compulab}/cm_t35/display.c (99%)
> rename board/{ => compulab}/cm_t35/eeprom.c (100%)
> rename board/{ => compulab}/cm_t35/eeprom.h (100%)
> rename board/{ => compulab}/cm_t35/leds.c (95%)
> create mode 100644 board/isee/igep0033/Makefile
> create mode 100644 board/isee/igep0033/board.c
> create mode 100644 board/isee/igep0033/board.h
> create mode 100644 board/isee/igep0033/mux.c
> create mode 100644 doc/README.omap-reset-time
> create mode 100644 drivers/net/phy/et1011c.c
> rename drivers/power/{twl6035.c => palmas.c} (61%)
> create mode 100644 include/configs/igep0033.h
> rename include/{twl6035.h => palmas.h} (68%)
>
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
