On 4/2/2013 3:45 AM, Fabio Estevam wrote:
On Mon, Apr 1, 2013 at 2:44 PM, Fabio Estevam <feste...@gmail.com> wrote:
On Mon, Apr 1, 2013 at 2:26 PM, Vikram Narayanan <vikram...@gmail.com> wrote:
Is the above same for all the variants of i.Mx?
Can we put this into a common header file?
Ok, I can try to put this into a common location.
+#define IOMUX_CONFIG_SION 0x10
+#define NO_MUX_I 0
+#define NO_PAD_I 0
+enum {
+ MX6_PAD_AUD_MCLK__AUDMUX_AUDIO_CLK_OUT =
IOMUX_PAD(0x02A4, 0x004C, 0, 0x0000, 0, 0),
+ MX6_PAD_AUD_MCLK__PWM4_PWMO =
IOMUX_PAD(0x02A4, 0x004C, 1, 0x0000, 0, 0),
+ MX6_PAD_AUD_MCLK__ECSPI3_RDY =
IOMUX_PAD(0x02A4, 0x004C, 2, 0x06B4, 0, 0),
+ MX6_PAD_AUD_MCLK__FEC_MDC =
IOMUX_PAD(0x02A4, 0x004C, 3, 0x0000, 0, 0),
Is the mx6slevk using all the pins defined here?
No, I put all pins for completion.
I meant completeness, here.
If not please take off the unused IOMUX pins so that we don't add dead code.
I thought it was common practice to provide the complete IOMUX pin file.
Looking at mx6q_pins.h I see that the IOMUX table is complete, but
mx6dl_pins.h is not, so just want to get a confirmation first before
doing v2.
Please refer the mx6dl discussion here.
http://www.mail-archive.com/u-boot@lists.denx.de/msg94194.html
It was Troy's idea, to include only the necessary pins.
Regards,
Vikram
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
