On Mon, Apr 1, 2013 at 2:26 PM, Vikram Narayanan <vikram...@gmail.com> wrote:
> Is the above same for all the variants of i.Mx?
> Can we put this into a common header file?
Ok, I can try to put this into a common location.
>> +#define IOMUX_CONFIG_SION 0x10
>> +#define NO_MUX_I 0
>> +#define NO_PAD_I 0
>> +enum {
>> + MX6_PAD_AUD_MCLK__AUDMUX_AUDIO_CLK_OUT =
>> IOMUX_PAD(0x02A4, 0x004C, 0, 0x0000, 0, 0),
>> + MX6_PAD_AUD_MCLK__PWM4_PWMO =
>> IOMUX_PAD(0x02A4, 0x004C, 1, 0x0000, 0, 0),
>> + MX6_PAD_AUD_MCLK__ECSPI3_RDY =
>> IOMUX_PAD(0x02A4, 0x004C, 2, 0x06B4, 0, 0),
>> + MX6_PAD_AUD_MCLK__FEC_MDC =
>> IOMUX_PAD(0x02A4, 0x004C, 3, 0x0000, 0, 0),
>
>
> Is the mx6slevk using all the pins defined here?
No, I put all pins for completion.
> If not please take off the unused IOMUX pins so that we don't add dead code.
I thought it was common practice to provide the complete IOMUX pin file.
Stefano, please advise.
Regards,
Fabio Estevam
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
