Hi Dirk, On Sun, Mar 31, 2013 at 3:39 AM, Dirk Behme <dirk.be...@gmail.com> wrote:
> Would it make sense to split this patch into two parts? One general "add > i.MX6 SoloLite support" and then the "add mx6slevk board board support"? Yes, I can split as suggested. >> +DATA 4 0x020c4018 0x00260324 >> + >> +DATA 4 0x020c4068 0xffffffff >> +DATA 4 0x020c406c 0xffffffff >> +DATA 4 0x020c4070 0xffffffff >> +DATA 4 0x020c4074 0xffffffff >> +DATA 4 0x020c4078 0xffffffff >> +DATA 4 0x020c407c 0xffffffff >> +DATA 4 0x020c4080 0xffffffff > > > I haven't looked into the manual, but are these the clock registers? If so, > is it necessary to set them to 0xffffffff? Or are these already the default > reset values? Yes, these are the default values, so I can remove them indeed; >> +#define MACH_TYPE_MX6SLEVK 4307 > > > Below, you seem to boot with device tree. Is this necessary, then? Yes, we need to be able to boot a 3.0.35 kernel from Freescale, which is the only one available for solo-lite currently. >> +#define CONFIG_EXTRA_ENV_SETTINGS \ >> + "script=boot.scr\0" \ >> + "uimage=uImage\0" \ >> + "console=ttymxc0\0" \ >> + "fdt_high=0xffffffff\0" \ >> + "initrd_high=0xffffffff\0" \ >> + "fdt_file=imx6sl-evk.dtb\0" \ > > > Is a kernel patch for this already available anywhere? Not yet. Only kernel 3.0.35 is available currently. Regards, Fabio Estevam _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
