On Thu, Mar 28, 2013 at 8:49 AM, <nandakumar.ramasw...@pricoltech.com> wrote: > > Hello, > > 1) Please share me, if any one used mx53loco - LVDS settings for hannstar > (mcimx-lvds1) display as per the below, > > setenv bootargs_base 'setenv bootargs console=ttymxc0,115200 console=tty1 > video=mxcdi1fb:RGB666,TOSHIBA-XGA di1_primary ldb=single,di=1,ch1_map=SPWG' > > 2) And I have modified the below files and codes for splash screen support > for mx53loco as per the mx6qsabrelite.c. Please correct me, if I wrong. > > File Name: mx53loco.h > > Included: > #define CONFIG_SPLASH_SCREEN
This is already part of include/configs/mx53loco.h Please post your changes in the format of a patch so that we can understand exactly what you are changing. Also, please make sure that the backlight is turned on. On my previous email the mx53ard code I pointed you to uses PWM to drive the backlight, you could simply use a GPIO instead. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
