Dear Fabio Estevam, In message <CAOMZO5C0Wi8qf82KDspM0=ZyMn8DBh3b215e-PmWJjDu7=s...@mail.gmail.com> you wrote: > > Would this approach work? > > http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git/tree/board/freescale/common/fsl_sys_rev.c?h=imx_v2009.08_3.0.0
I bet there is a to of existing ways to encode and pass such information - in NOR flash, EEPROM, encoded in the serial number and/or MAC addresses, whatever. I would expect that each major board vendor has his preferred style, and I don't see how this could be changed. Also, pleas ekeep inmind that there are two sides of the issue: - storage device and format for the related information - method and for mat of passing this on to the kernel The Subject: addresses only the second part of this. And as mentioned before, there is a standardized method of passing such infoirmation to the kernel - through the device tree. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Always leave room to add an explanation if it doesn't work out. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot