On Thu, Mar 14, 2013 at 07:53:07AM +0100, Koen Kooi wrote: > > Op 13 mrt. 2013, om 21:19 heeft Matt Porter <mpor...@ti.com> het volgende > geschreven: > > > On Wed, Mar 13, 2013 at 08:02:26PM +0100, Koen Kooi wrote: > >> > >> Op 13 mrt. 2013, om 16:07 heeft Nishanth Menon <n...@ti.com> het volgende > >> geschreven: > >> > >>> On 16:05-20130313, Koen Kooi wrote: > >>>> > >>>> Op 13 mrt. 2013, om 16:02 heeft Nishanth Menon <n...@ti.com> het > >>>> volgende geschreven: > >>>> > >>>>> On Wed, Mar 13, 2013 at 9:57 AM, Koen Kooi <k...@dominion.thruhere.net> > >>>>> wrote: > >>>>>> > >>>>>> Op 13 mrt. 2013, om 15:35 heeft Nishanth Menon <n...@ti.com> het > >>>>>> volgende geschreven: > >>>>>> > >>>>>>> On 10:20-20130313, Tom Rini wrote: > >>>>>>>> From: Koen Kooi <k...@dominion.thruhere.net> > >>>>>>>> > >>>>>>>> Signed-off-by: Koen Kooi <k...@dominion.thruhere.net> > >>>>>>>> Acked-by: Peter Korsgaard <jac...@sunsite.dk> > >>>>>>>> --- > >>>>>>>> include/configs/am335x_evm.h | 2 ++ > >>>>>>>> 1 file changed, 2 insertions(+) > >>>>>>>> > >>>>>>>> diff --git a/include/configs/am335x_evm.h > >>>>>>>> b/include/configs/am335x_evm.h > >>>>>>>> index 33ee2c4..abf4e39 100644 > >>>>>>>> --- a/include/configs/am335x_evm.h > >>>>>>>> +++ b/include/configs/am335x_evm.h > >>>>>>>> @@ -87,6 +87,8 @@ > >>>>>>>> "findfdt="\ > >>>>>>>> "if test $board_name = A335BONE; then " \ > >>>>>>>> "setenv fdtfile am335x-bone.dtb; fi; " \ > >>>>>>>> + "if test $board_name = A335BNLT; then " \ > >>>>>>>> + "setenv fdtfile am335x-bonelt.dtb; fi; " \ > >>>>>>> could we not use am335x-boneblack.dtb instead? > >>>>>> > >>>>>> it's bonelt in the kernel, so boneblack would fail to load a dtb > >>>>> $ git describe > >>>>> v3.9-rc2 > >>>>> $ ls arch/arm/boot/dts/*bone*.dts* > >>>>> arch/arm/boot/dts/am335x-bone.dts > >>>>> ??? > >>>> > >>>> What a surprise, missing stuff in mainline! It's present in the vendor > >>>> kernel, which is what is shipping with the board. > >>> No surprise there as marketing names are finalized close to product > >>> launches. If there is an vendor u-boot, it can remain in sync with what > >>> ever the vendor kernel is. If it is upstream, we might want to think > >>> longterm. > >> > >> I'm in charge of pushing the am335x-bonelt.dts upstream to Linus and I'd > >> like to keep everything in sync. I'm not fond of renaming it again, the > >> EEPROM says BNLT, not BNB :) > > > > That's a horrible reason to confuse users. The EEPROM contents are > > irrelevant. Users look for something to match the board name, this > > does not. It's wrong. > > It is stupid, but that's what you get for renaming boards. The real problem > with this is that it is a flag day, the kernel and u-boot need to change both > at the same time. And after that you'll have a mismatch if you use different > versions. > > Anyway, patches welcome for the vendor kernel to rename it.
The pull request is https://github.com/beagleboard/kernel/pull/33 Should be easy to keep those in sync as you control the s/w going out on all the new BeagleBones. The type of people that have early boards can all handle s/w changes like this otherwise they shouldn't be in the alpha test group. Anything else that prevents us from fixing this fdtfile hunk now? -Matt _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
