Op 13 mrt. 2013, om 21:19 heeft Matt Porter <mpor...@ti.com> het volgende geschreven:
> On Wed, Mar 13, 2013 at 08:02:26PM +0100, Koen Kooi wrote: >> >> Op 13 mrt. 2013, om 16:07 heeft Nishanth Menon <n...@ti.com> het volgende >> geschreven: >> >>> On 16:05-20130313, Koen Kooi wrote: >>>> >>>> Op 13 mrt. 2013, om 16:02 heeft Nishanth Menon <n...@ti.com> het volgende >>>> geschreven: >>>> >>>>> On Wed, Mar 13, 2013 at 9:57 AM, Koen Kooi <k...@dominion.thruhere.net> >>>>> wrote: >>>>>> >>>>>> Op 13 mrt. 2013, om 15:35 heeft Nishanth Menon <n...@ti.com> het >>>>>> volgende geschreven: >>>>>> >>>>>>> On 10:20-20130313, Tom Rini wrote: >>>>>>>> From: Koen Kooi <k...@dominion.thruhere.net> >>>>>>>> >>>>>>>> Signed-off-by: Koen Kooi <k...@dominion.thruhere.net> >>>>>>>> Acked-by: Peter Korsgaard <jac...@sunsite.dk> >>>>>>>> --- >>>>>>>> include/configs/am335x_evm.h | 2 ++ >>>>>>>> 1 file changed, 2 insertions(+) >>>>>>>> >>>>>>>> diff --git a/include/configs/am335x_evm.h >>>>>>>> b/include/configs/am335x_evm.h >>>>>>>> index 33ee2c4..abf4e39 100644 >>>>>>>> --- a/include/configs/am335x_evm.h >>>>>>>> +++ b/include/configs/am335x_evm.h >>>>>>>> @@ -87,6 +87,8 @@ >>>>>>>> "findfdt="\ >>>>>>>> "if test $board_name = A335BONE; then " \ >>>>>>>> "setenv fdtfile am335x-bone.dtb; fi; " \ >>>>>>>> + "if test $board_name = A335BNLT; then " \ >>>>>>>> + "setenv fdtfile am335x-bonelt.dtb; fi; " \ >>>>>>> could we not use am335x-boneblack.dtb instead? >>>>>> >>>>>> it's bonelt in the kernel, so boneblack would fail to load a dtb >>>>> $ git describe >>>>> v3.9-rc2 >>>>> $ ls arch/arm/boot/dts/*bone*.dts* >>>>> arch/arm/boot/dts/am335x-bone.dts >>>>> ??? >>>> >>>> What a surprise, missing stuff in mainline! It's present in the vendor >>>> kernel, which is what is shipping with the board. >>> No surprise there as marketing names are finalized close to product >>> launches. If there is an vendor u-boot, it can remain in sync with what >>> ever the vendor kernel is. If it is upstream, we might want to think >>> longterm. >> >> I'm in charge of pushing the am335x-bonelt.dts upstream to Linus and I'd >> like to keep everything in sync. I'm not fond of renaming it again, the >> EEPROM says BNLT, not BNB :) > > That's a horrible reason to confuse users. The EEPROM contents are > irrelevant. Users look for something to match the board name, this > does not. It's wrong. It is stupid, but that's what you get for renaming boards. The real problem with this is that it is a flag day, the kernel and u-boot need to change both at the same time. And after that you'll have a mismatch if you use different versions. Anyway, patches welcome for the vendor kernel to rename it. regards, Koen _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
