Dear Alexandre Belloni, In message <20130219112532.gb24...@piout.net> you wrote: > > No, that is not supported and probably won't be. Some people will argue
I think you are wrong. This is definitely a "not supported _yet_". > that you probably don't need a bootloader once you are able to boot a > linux kernel as you can probably do everything you want from there. Yes, some people will think so, and some will actually do that. Others (and I would expect these to be the majority) will realize the benefits of being able to switch on demand (say, key press, jumper setting, etc.) between different boot modes, boot images, etc. I am absolutely sure that SPL support for iMX6 will be added rather sooner than later. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de 8) Use common sense in routing cable. Avoid wrapping coax around sources of strong electric or magnetic fields. Do not wrap the cable around flourescent light ballasts or cyclotrons, for example. - Ethernet Headstart Product, Information and Installation Guide, Bell Technologies, pg. 11 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot