Boot script support brings Plutux in line with other Tegra boards. In order to enable booting a Linux kernel with initial ramdisk, also add support for the new FIT image type.
Signed-off-by: Thierry Reding <thierry.red...@avionic-design.de> --- include/configs/plutux.h | 31 +++++++++++++++++++------------ 1 file changed, 19 insertions(+), 12 deletions(-) diff --git a/include/configs/plutux.h b/include/configs/plutux.h index deee237..3332ea8 100644 --- a/include/configs/plutux.h +++ b/include/configs/plutux.h @@ -42,8 +42,7 @@ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE #define CONFIG_BOARD_EARLY_INIT_F - -#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_BOARD_LATE_INIT /* SD/MMC */ #define CONFIG_MMC @@ -51,6 +50,23 @@ #define CONFIG_TEGRA_MMC #define CONFIG_CMD_MMC +#define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION +#define CONFIG_FS_EXT4 +#define CONFIG_FS_FAT +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC + +/* NAND support */ +#define CONFIG_CMD_NAND +#define CONFIG_TEGRA_NAND +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +/* Environment in NAND, aligned to start of last sector */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET (SZ_512M - SZ_128K) /* 128K sectors */ + /* USB host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA @@ -65,18 +81,9 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT - +/* support the new (FDT-based) image format */ #define CONFIG_FIT -#define CONFIG_BOOTCOMMAND \ - "mmc rescan;" \ - "ext2load mmc 0 0x17000000 /boot/uImage;" \ - "bootm" - #include "tegra-common-post.h" #endif /* __CONFIG_H */ -- 1.8.1.2 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
