Boot script support brings Medcom-Wide in line with other Tegra boards. In order to enable booting a Linux kernel with initial ramdisk, also add support for the new FIT image type.
Signed-off-by: Thierry Reding <thierry.red...@avionic-design.de> --- include/configs/medcom-wide.h | 34 ++++++++++++++++++++-------------- 1 file changed, 20 insertions(+), 14 deletions(-) diff --git a/include/configs/medcom-wide.h b/include/configs/medcom-wide.h index bae4ba0..ea8e83f 100644 --- a/include/configs/medcom-wide.h +++ b/include/configs/medcom-wide.h @@ -44,14 +44,29 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_LATE_INIT -#define CONFIG_ENV_IS_NOWHERE - /* SD/MMC */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_TEGRA_MMC #define CONFIG_CMD_MMC +#define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION +#define CONFIG_FS_EXT4 +#define CONFIG_FS_FAT +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC + +/* NAND support */ +#define CONFIG_CMD_NAND +#define CONFIG_TEGRA_NAND +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +/* Environment in NAND, aligned to start of last sector */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET (SZ_512M - SZ_128K) /* 128K sectors */ + /* USB host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA @@ -66,18 +81,6 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT - -#define CONFIG_FIT - -#define CONFIG_BOOTCOMMAND \ - "mmc rescan;" \ - "ext2load mmc 0 0x17000000 /boot/uImage;" \ - "bootm" - /* LCD support */ #define CONFIG_LCD #define CONFIG_PWM_TEGRA @@ -85,6 +88,9 @@ #define LCD_BPP LCD_COLOR16 #define CONFIG_SYS_WHITE_ON_BLACK +/* support the new (FDT-based) image format */ +#define CONFIG_FIT + #include "tegra-common-post.h" #endif /* __CONFIG_H */ -- 1.8.1.2 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
