On 11/10/2012 12:28 AM, Stefano Babic wrote:
On 23/10/2012 04:40, Troy Kisky wrote:
This series tries to separate the mii regsisters
from the ethernet registers as suggested by
Andy Fleming. Then, mx6qsabrelite is changed
to find the phy address from the possibles 4-7.
The V3 series is very different from V2.
Troy Kisky (9):
doc/README.fec_mxc: add documentation
net: fec_mxc: delete CONFIG_FEC_MXC_MULTI
net: fec_mxc: change fec_mii_setspeed parameter
net: fec_mxc: have fecmxc_initialize call fecmxc_initialize_multi
phy: add phy_find_by_mask/phy_connect_dev
net: fec_mxc: use fec_set_dev_name to set name
net: fec_mxc: only call phy_connect in fec_probe
net: fec_mxc: get phydev before fec_probe
mx6qsabrelite: search mii phy address 4-7
Hi Joe,
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 24 +++-
doc/README.fec_mxc | 27 ++++
drivers/net/fec_mxc.c | 164 ++++++++++++++-----------
drivers/net/fec_mxc.h | 2 +-
drivers/net/phy/phy.c | 128 +++++++++++--------
include/configs/m28evk.h | 1 -
include/configs/mx28evk.h | 1 -
include/configs/sc_sps_1.h | 1 -
include/netdev.h | 7 ++
include/phy.h | 3 +
10 files changed, 227 insertions(+), 131 deletions(-)
create mode 100644 doc/README.fec_mxc
Patches are assigned to me in patchworks. Do you have any issue with
this patchset ? If it is ok for you, I will apply it to u-boot-imx.
Best regards,
Stefano
Who should I pester to see some progress on this ?
Thanks
Troy
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
