On Wednesday 11 March 2009, Felix Radensky wrote: > > The PCIe device used here is the Intel PRO/1000 PT Desktop card. > > > > Which Kilauea board revision are you using? And do you see the same > > problems with other PCIe cards as well? > > I use Kilauea revision 1.2 and exactly the same network card as you.
I'm using the same board revision too. > The problem is still here. Strange. > It doesn't happen with other PCI-E card I have > (10G Ethernet adapter). > > I have a feeling that 2 Kilauea boards of the same revision may sometimes > exhibit different behavior with the same version of u-boot. This could be the case. Do you have another Kilauea board? > For example, > with u-boot 2008.10-rc2 that comes with AMCC CD, memory was properly > detected on one board in bootstrap option B but not detected on the > another. I had to recompile u-boot and disable autocalibration to make > things work on this board. This is a different issue. The DDR2 autocalibration had a bug. Because of this some boards could boot just fine with autocalibration enabled and some not. This bug should be fixed now. In the latest U-Boot version autocalibration is enabled again for Kilauea and seems to work now. At least I didn't notice any problems anymore. Please give it a try and let me know if this doesn't work for you. But again, this is a different issue. Not sure how to help you with the PCIe detection problem. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
