On Monday 02 March 2009, Felix Radensky wrote: > > Also, I've compared the values of SDR0_SDSTP0-SDR0_SDSTP3 registers in > > bootstrap options C and H > > and didn't find anything suspicious. There are differences in various > > divisor values, but that is expected. > > Tested with u-boot 2009.03-rc1 and linux-2.6.29-rc5 > > It is even more simple. It's enough to power up the board and run > "reset" in u-boot, > to make u-boot recognize the card when it comes up.
Did you already try setting the "pciscandelay" env variable? Set it to 5 for 5 seconds delay before PnP scanning. Does this help? Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
