On Tue, Dec 4, 2012 at 3:43 PM, Stephen Warren <swar...@wwwdotorg.org> wrote: > On 12/04/2012 01:22 PM, Tom Warren wrote: >> Stephen, >> >> On Mon, Dec 3, 2012 at 5:53 PM, Stephen Warren <swar...@wwwdotorg.org> wrote: >>> On 12/03/2012 04:45 PM, Tom Warren wrote: >>>> This build is stripped down. It boots to the command prompt. >>>> GPIO is the only peripheral supported. Others TBD. >>>> >>>> include/configs/tegra-common.h now holds common config options >>>> for Tegra SoCs. > ... >>> In this patch, you also should move MEM_LAYOUT_ENV_SETTINGS from >>> tegra-common-post.h into tegraNN-common.h, or something like that. >> >> I can do that, or we can wait until those settings are going to be >> used, i.e. once I've added peripheral support so a kernel can be found >> and loaded and executed. > > Isn't it just cut/pasting those 5 lines (well, and the comment before > them I guess) and s/0x0/0x8/ in all the lines. It seems pretty easy to > get the right values in from the start. > > Without this, it's a PITA to test bootm with this U-Boot (you can > download a kernel over serial with loady for example; something I tested > with earlier revisions of this series).
I'll move the MEM_LAYOUT_ENV_SETTINGS (and update the addresses) since I'm doing a V3. Also, WRT the 408MHz tweak, I got it working w/relatively little pain. That'll also be the de facto PLLP speed for T30 in V3 of the patchset. Thanks, Tom _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
