On Sat, 24 Jan 2009 00:36:34 +0100 Wolfgang Denk <w...@denx.de> wrote:
> Dear Heiko Schocher, > > In message <4925268b.2020...@denx.de> you wrote: > > This patch adds support for the kmeter1 board from Keymile, > > based on a Freescale MPC8360 CPU. > > > > - serial console on UART 1 > > - 256 MB DDR2 RAM > > - 64 MB NOR Flash > > - Ethernet RMII Mode over UCC4 > > - PHY SMSC LAN8700 > > > > Signed-off-by: Heiko Schocher <h...@denx.de> > > --- > > > > changes since v2: > > > > added comments from Kim Philips > > added doc/README.kmeter1 > > > > MAINTAINERS | 1 + > > MAKEALL | 1 + > > Makefile | 3 + > > board/keymile/kmeter1/Makefile | 51 ++++ > > board/keymile/kmeter1/config.mk | 24 ++ > > board/keymile/kmeter1/kmeter1.c | 153 ++++++++++++ > > doc/README.kmeter1 | 91 +++++++ > > include/configs/kmeter1.h | 523 > > +++++++++++++++++++++++++++++++++++++++ > > 8 files changed, 847 insertions(+), 0 deletions(-) > > create mode 100644 board/keymile/kmeter1/Makefile > > create mode 100644 board/keymile/kmeter1/config.mk > > create mode 100644 board/keymile/kmeter1/kmeter1.c > > create mode 100644 doc/README.kmeter1 > > create mode 100644 include/configs/kmeter1.h > > Applied, thanks. eh? this is sitting in u-boot-mpc83xx.git next - I was going to ask you to pull soon. Kim _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
