Dear Heiko Schocher,
In message <4925268b.2020...@denx.de> you wrote:
> This patch adds support for the kmeter1 board from Keymile,
> based on a Freescale MPC8360 CPU.
>
> - serial console on UART 1
> - 256 MB DDR2 RAM
> - 64 MB NOR Flash
> - Ethernet RMII Mode over UCC4
> - PHY SMSC LAN8700
>
> Signed-off-by: Heiko Schocher <h...@denx.de>
> ---
>
> changes since v2:
>
> added comments from Kim Philips
> added doc/README.kmeter1
>
> MAINTAINERS | 1 +
> MAKEALL | 1 +
> Makefile | 3 +
> board/keymile/kmeter1/Makefile | 51 ++++
> board/keymile/kmeter1/config.mk | 24 ++
> board/keymile/kmeter1/kmeter1.c | 153 ++++++++++++
> doc/README.kmeter1 | 91 +++++++
> include/configs/kmeter1.h | 523
> +++++++++++++++++++++++++++++++++++++++
> 8 files changed, 847 insertions(+), 0 deletions(-)
> create mode 100644 board/keymile/kmeter1/Makefile
> create mode 100644 board/keymile/kmeter1/config.mk
> create mode 100644 board/keymile/kmeter1/kmeter1.c
> create mode 100644 doc/README.kmeter1
> create mode 100644 include/configs/kmeter1.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
News is what a chap who doesn't care much about anything wants to
read. And it's only news until he's read it. After that it's dead.
- Evelyn Waugh _Scoop_ (1938) bk. 1, ch. 5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
