On Nov 6, 2008, at 2:04 PM, Jon Loeliger wrote: > On Wed, 2008-11-05 at 14:55 -0600, Becky Bruce wrote: >> The memory map on the 8641hpcn is modified to look more like >> the 85xx boards; this is a step towards a more standardized >> layout going forward. As part of this change, we now relocate >> the flash. >> >> The regions for some of the mappings were far larger than they >> needed to be. I have reduced the mappings to match the >> actual sizes supported by the hardware. >> >> In addition I have removed the comments at the head >> of the BAT blocks in the config file, rather than updating >> them. These get horribly out of date, and it's a simple >> matter to look at the defines to see what they are set to >> since everything is right here in the same file. >> >> Signed-off-by: Becky Bruce <[EMAIL PROTECTED]> >> --- >> board/freescale/mpc8641hpcn/config.mk | 2 +- >> board/freescale/mpc8641hpcn/law.c | 23 ++++++---- >> cpu/mpc86xx/start.S | 2 +- >> include/configs/MPC8641HPCN.h | 76 ++++++++++++++++ >> +---------------- >> 4 files changed, 54 insertions(+), 49 deletions(-) > > Does this affect any flash addresses mentioned in > the README.mpc86xx too?
Yes, it does. It affects a lot of stuff in that file which I was, until now, unaware of. Will fix. Thanks! -Becky _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
