On Wed, 2008-11-05 at 14:55 -0600, Becky Bruce wrote: > The memory map on the 8641hpcn is modified to look more like > the 85xx boards; this is a step towards a more standardized > layout going forward. As part of this change, we now relocate > the flash. > > The regions for some of the mappings were far larger than they > needed to be. I have reduced the mappings to match the > actual sizes supported by the hardware. > > In addition I have removed the comments at the head > of the BAT blocks in the config file, rather than updating > them. These get horribly out of date, and it's a simple > matter to look at the defines to see what they are set to > since everything is right here in the same file. > > Signed-off-by: Becky Bruce <[EMAIL PROTECTED]> > --- > board/freescale/mpc8641hpcn/config.mk | 2 +- > board/freescale/mpc8641hpcn/law.c | 23 ++++++---- > cpu/mpc86xx/start.S | 2 +- > include/configs/MPC8641HPCN.h | 76 > +++++++++++++++++---------------- > 4 files changed, 54 insertions(+), 49 deletions(-)
Does this affect any flash addresses mentioned in the README.mpc86xx too? jdl _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
