Le mercredi 08 octobre 2008 à 10:54 +0200, Remy Bohmer a écrit :
> I made it 2 seperate patches. The 1st of this series is fully tested and
> correct
> on at least the AT91SAM9261 cores. I hope it fixes the known problems on
> AT91SAM9263 (and other) cores also, maybe Stelian can verify this.
> If it does not help on sam9263, it should not make it worse either...
It still doesn't help (on AT91SAM9263):
usb start
(Re)start USB...
USB: scanning bus for devices... New Device 0
usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length
0x40
set address 1
usb_control_msg: request: 0x5, requesttype: 0x0, value 0x1 index 0x0 length 0x0
usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length
0x12
usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length
0x9
usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length
0x19
get_conf_no 0 Result 25, wLength 25
if 0, ep 0
##EP epmaxpacketin[1] = 2
set configuration 1
usb_control_msg: request: 0x9, requesttype: 0x0, value 0x1 index 0x0 length 0x0
new device strings: Mfr=0, Product=1, SerialNumber=0
usb_control_msg: request: 0x6, requesttype: 0x80, value 0x300 index 0x0 length
0xFF
USB device number 1 default language ID 0x409
usb_control_msg: request: 0x6, requesttype: 0x80, value 0x301 index 0x409
length 0xFF
Manufacturer
Product OHCI Root Hub
SerialNumber
usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length
0x4
usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length
0x9
usb_control_msg: request: 0x0, requesttype: 0xA0, value 0x0 index 0x0 length 0x4
usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0
usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x2 length 0x0
usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4
usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x2 length 0x4
usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x2 length 0x4
usb_control_msg: request: 0x1, requesttype: 0x23, value 0x10 index 0x2 length
0x0
usb_control_msg: request: 0x3, requesttype: 0x23, value 0x4 index 0x2 length 0x0
usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x2 length 0x4
usb_control_msg: request: 0x1, requesttype: 0x23, value 0x14 index 0x2 length
0x0
New Device 1
usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length
0x40
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did
not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did
not provide a handshake (OUT) (5)
usb_new_device: usb_get_descriptor() failed
usb_control_msg: request: 0x1, requesttype: 0x23, value 0x1 index 0x2 length 0x0
2 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) found
U-Boot>
--
Stelian Pop <[EMAIL PROTECTED]>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
